{"id":8914,"date":"2026-11-03T05:00:00","date_gmt":"2026-11-02T21:00:00","guid":{"rendered":"https:\/\/richarms.com\/?p=8914"},"modified":"2026-11-01T16:15:52","modified_gmt":"2026-11-01T08:15:52","slug":"magnetic-snap-installation-problems","status":"publish","type":"post","link":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems","title":{"rendered":"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment"},"content":{"rendered":"<p>Magnetic snap installation problems can involve the attachment, the material or the way the closure meets. Start by describing what moves or looks wrong. A snap that turns in its panel is a different problem from a securely attached snap whose mating faces do not line up.<\/p>\n<p>The checks below are a diagnostic route, not a claim that one symptom has one guaranteed cause. Keep the affected samples and compare them with an approved assembly before changing the setup.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Inhalts\u00fcbersicht<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Umschalten auf<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Classify_magnetic_snap_installation_problems_first\" >Classify magnetic snap installation problems first<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Inspect_both_sides_of_the_assembly\" >Inspect both sides of the assembly<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Review_preparation_and_positioning\" >Review preparation and positioning<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Confirm_the_die_pair_and_support\" >Confirm the die pair and support<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Illustrated_installation_references\" >Illustrated installation references<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Rivet_magnetic_snap_support_the_snap_before_setting_the_cap\" >Rivet magnetic snap: support the snap before setting the cap<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Prong_magnetic_snap_match_the_slots_and_backing_plates\" >Prong magnetic snap: match the slots and backing plates<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Test_a_controlled_correction\" >Test a controlled correction<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#Send_useful_evidence_for_troubleshooting\" >Send useful evidence for troubleshooting<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Classify_magnetic_snap_installation_problems_first\"><\/span>Classify magnetic snap installation problems first<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<table>\n<thead>\n<tr>\n<th><\/th>\n<\/tr>\n<\/thead>\n<tr>\n<th>Observed symptom<\/th>\n<th>First checks<\/th>\n<\/tr>\n<tr>\n<td>Hardware moves in the material<\/td>\n<td>Component completeness, backing, fixing stack, preparation and formed attachment.<\/td>\n<\/tr>\n<tbody>\n<tr>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td>Cap or fixing end is deformed<\/td>\n<td>Die identity, support profile, component seating and approved setting conditions.<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td>Material is marked or damaged<\/td>\n<td>Hole or slot preparation, support, local stack and contact with the tooling.<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<p>Two halves meet off-centerMarking positions, panel orientation and finished-product geometry.<\/p>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<p>Securely fixed closure feels weakMating-face alignment, intervening material, gap and selected closure specification.<\/p>\n<td><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These are possible areas to investigate. Do not infer a confirmed root cause from a single front photograph.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Inspect_both_sides_of_the_assembly\"><\/span>Inspect both sides of the assembly<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Photograph the front, back and side of the affected area. Include both mating halves and one loose complete set. Note whether the problem appears immediately after setting or after a later assembly step, such as lining or stitching.<\/p>\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" class=\"lazyload wp-image-8908\" src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong.jpg\" data-orig-src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong.jpg\" alt=\"Back views of two gold-tone magnetic snap components with prongs\" width=\"1400\" height=\"1050\" srcset=\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%271400%27%20height%3D%271050%27%20viewBox%3D%270%200%201400%201050%27%3E%3Crect%20width%3D%271400%27%20height%3D%271050%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\" data-srcset=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-16x12.jpg 16w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-200x150.jpg 200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-300x225.jpg 300w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-400x300.jpg 400w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-500x375.jpg 500w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-600x450.jpg 600w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-700x525.jpg 700w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-768x576.jpg 768w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-800x600.jpg 800w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-1024x768.jpg 1024w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong-1200x900.jpg 1200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-prong.jpg 1400w\" data-sizes=\"auto\" data-orig-sizes=\"(max-width: 1400px) 100vw, 1400px\" \/><figcaption>Inspect the attachment on both halves of a magnetic snap set.<\/figcaption><\/figure>\n<p>Check the required backing parts against the selected model. Inspect the actual fixing end, not only the decorative face. If a component has been substituted, record that change rather than assuming it is equivalent.<\/p>\n<p>For riveted models, review the <a href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-rivet-length\/\">length and material-stack checklist<\/a>. For weak closure with secure fixing, use the separate <a href=\"https:\/\/richarms.com\/de\/magnetic-snap-strength\/\">magnetic strength guide<\/a>.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Review_preparation_and_positioning\"><\/span>Review preparation and positioning<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Compare hole or slot positions with the approved sample and component drawing. Check whether the two panels were marked in the intended orientation. Test alignment in the final product shape, because a fold or seam can affect how the magnetic faces meet.<\/p>\n<p>Keep a record of the preparation tool as well as the setting die. A change to the cutting operation can alter the assembly even when the final press setup stays the same. Do not enlarge holes or slots on finished goods without an approved correction method.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Confirm_the_die_pair_and_support\"><\/span>Confirm the die pair and support<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" class=\"lazyload wp-image-8899\" src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies.jpg\" data-orig-src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies.jpg\" alt=\"Magnetic snap setting dies with two different working faces\" width=\"1050\" height=\"1400\" srcset=\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%271050%27%20height%3D%271400%27%20viewBox%3D%270%200%201050%201400%27%3E%3Crect%20width%3D%271050%27%20height%3D%271400%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\" data-srcset=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-9x12.jpg 9w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-200x267.jpg 200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-225x300.jpg 225w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-400x533.jpg 400w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-500x667.jpg 500w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-600x800.jpg 600w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-700x933.jpg 700w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-768x1024.jpg 768w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies-800x1067.jpg 800w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-dies.jpg 1050w\" data-sizes=\"auto\" data-orig-sizes=\"(max-width: 1050px) 100vw, 1050px\" \/><figcaption>Match both working faces to the specified snap components.<\/figcaption><\/figure>\n<p>Identify both dies and inspect their working faces. Confirm that they belong to the snap model and tool system. Look for incorrect seating, contamination or visible damage, and have the tooling supplier assess concerns before continued use.<\/p>\n<p>Read the <a href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-setting-dies\/\">setting die compatibility guide<\/a> if the equipment or tooling came from another supplier. A mount that fits does not establish that the working face supports the cap or forms the fixing end correctly.<\/p>\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" class=\"lazyload wp-image-8902\" src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet.jpg\" data-orig-src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet.jpg\" alt=\"Magnetic snap component with a projecting post seated in a support die\" width=\"1050\" height=\"1400\" srcset=\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%271050%27%20height%3D%271400%27%20viewBox%3D%270%200%201050%201400%27%3E%3Crect%20width%3D%271050%27%20height%3D%271400%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\" data-srcset=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-9x12.jpg 9w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-200x267.jpg 200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-225x300.jpg 225w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-400x533.jpg 400w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-500x667.jpg 500w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-600x800.jpg 600w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-700x933.jpg 700w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-768x1024.jpg 768w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet-800x1067.jpg 800w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-rivet.jpg 1050w\" data-sizes=\"auto\" data-orig-sizes=\"(max-width: 1050px) 100vw, 1050px\" \/><figcaption>Check the post, support surface and mating component as one assembly.<\/figcaption><\/figure>\n<p>The reference photos show components and tooling to inspect; they are not before-and-after evidence of a corrected failure.<\/p>\n<div class=\"video-shortcode\"><iframe title=\"How to Install Hand Tooling for Single Rivet Magnetic Snaps - Richarms.com\" width=\"1200\" height=\"675\" src=\"https:\/\/www.youtube.com\/embed\/P2R2KSB6QS0?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe><\/div>\n<p>&nbsp;<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Illustrated_installation_references\"><\/span>Illustrated installation references<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use these model-specific examples to review the assembly sequence. Match the snap, preparation tool and setting tools before applying either method to your material.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Rivet_magnetic_snap_support_the_snap_before_setting_the_cap\"><\/span>Rivet magnetic snap: support the snap before setting the cap<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Check the matching base, the post passing through the material and the cap setter shown in the sequence. The No. 3 punch label identifies the illustrated tool; confirm the required hole size for your selected model.<\/p>\n<figure class=\"wp-block-image size-full\"><a href=\"https:\/\/www.pinterest.com\/pin\/702139398202397251\/\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en.jpg\" data-orig-src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en.jpg\" alt=\"Rivet magnetic snap hand-setting sequence with English tool labels and four installation steps\" class=\"lazyload wp-image-8920\" width=\"1221\" height=\"1289\" loading=\"lazy\" srcset=\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%271221%27%20height%3D%271289%27%20viewBox%3D%270%200%201221%201289%27%3E%3Crect%20width%3D%271221%27%20height%3D%271289%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\" data-srcset=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-11x12.jpg 11w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-200x211.jpg 200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-284x300.jpg 284w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-400x422.jpg 400w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-500x528.jpg 500w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-600x633.jpg 600w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-700x739.jpg 700w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-768x811.jpg 768w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-800x845.jpg 800w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-970x1024.jpg 970w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en-1200x1267.jpg 1200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-rivet-hammer-installation-en.jpg 1221w\" data-sizes=\"auto\" data-orig-sizes=\"auto, (max-width: 1221px) 100vw, 1221px\" \/><\/a><figcaption>Rivet magnetic snap installation: hole preparation, supported positioning and cap setting. <a href=\"https:\/\/www.pinterest.com\/pin\/702139398202397251\/\" target=\"_blank\" rel=\"noopener noreferrer\">View the corresponding Richarms Pinterest pin<\/a>.<\/figcaption><\/figure>\n<h3><span class=\"ez-toc-section\" id=\"Prong_magnetic_snap_match_the_slots_and_backing_plates\"><\/span>Prong magnetic snap: match the slots and backing plates<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Check slot spacing against the actual prongs, then confirm the backing plates are fitted before the prongs are formed. The illustrated punch is labeled for 18 mm snaps; this does not mean an 18 mm slot width or universal compatibility.<\/p>\n<figure class=\"wp-block-image size-full\"><a href=\"https:\/\/www.pinterest.com\/pin\/702139398202397230\/\" target=\"_blank\" rel=\"noopener noreferrer\"><img decoding=\"async\" src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en.jpg\" data-orig-src=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en.jpg\" alt=\"Prong magnetic snap installation with a slot punch, backing plates and English step-by-step instructions\" class=\"lazyload wp-image-8921\" width=\"1086\" height=\"1448\" loading=\"lazy\" srcset=\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%271086%27%20height%3D%271448%27%20viewBox%3D%270%200%201086%201448%27%3E%3Crect%20width%3D%271086%27%20height%3D%271448%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\" data-srcset=\"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-9x12.jpg 9w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-200x267.jpg 200w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-225x300.jpg 225w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-400x533.jpg 400w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-500x667.jpg 500w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-600x800.jpg 600w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-700x933.jpg 700w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-768x1024.jpg 768w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en-800x1067.jpg 800w, https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-prong-slot-punch-installation-en.jpg 1086w\" data-sizes=\"auto\" data-orig-sizes=\"auto, (max-width: 1086px) 100vw, 1086px\" \/><\/a><figcaption>Prong magnetic snap installation: matching slots, backing plates and flattened prongs. <a href=\"https:\/\/www.pinterest.com\/pin\/702139398202397230\/\" target=\"_blank\" rel=\"noopener noreferrer\">View the corresponding Richarms Pinterest pin<\/a>.<\/figcaption><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Test_a_controlled_correction\"><\/span>Test a controlled correction<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Set aside affected output and run the proposed correction on sample material. Change one identified factor at a time, keeping the other components and conditions recorded. Compare the result with the approved sample and the buyer\u2019s acceptance requirements.<\/p>\n<p>Do not automatically increase pressure, repeat hammer strikes or re-press a finished item. Those actions can obscure the original problem or further deform the assembly. Ask the supplier whether the affected hardware can be reworked or should be replaced.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Send_useful_evidence_for_troubleshooting\"><\/span>Send useful evidence for troubleshooting<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li>Snap model, order reference and a complete loose-set photo.<\/li>\n<li>Front, back and side photos of the installed result.<\/li>\n<li>Material layers, backing parts and thickness information.<\/li>\n<li>Tool model, both die identifiers and current approved setup details.<\/li>\n<li>When the symptom appears and which recent changes were made.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/richarms.com\/de\/contact\/\">Send this information to Richarms for review<\/a>. Once the correction is approved, update the setup record and retain a new reference sample. The <a href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-guide\/\">installation guide<\/a> provides the full sequence for approving a fresh combination.<\/p>","protected":false},"excerpt":{"rendered":"<p>Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.<\/p>","protected":false},"author":1,"featured_media":8906,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-8914","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.4 - aioseo.com -->\n\t<meta name=\"description\" content=\"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"riharms\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.4\" \/>\n\t\t<meta property=\"og:locale\" content=\"de_DE\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Richarms \u00bb Richarms\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Magnetic Snap Installation Problems: Checks | Richarms\" \/>\n\t\t<meta property=\"og:description\" content=\"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-11-02T21:00:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-01T08:15:52+00:00\" \/>\n\t\t<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/richarmsbaghardware\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@Richarms2003\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Magnetic Snap Installation Problems: Checks | Richarms\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@Richarms2003\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#article\",\"name\":\"Magnetic Snap Installation Problems: Checks | Richarms\",\"headline\":\"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment\",\"author\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/author\\\/riharms#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/richarms.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/richarms-installation-slots.jpg\",\"width\":800,\"height\":800,\"caption\":\"Prepare holes or slots for the specified attachment before setting the hardware.\"},\"datePublished\":\"2026-11-03T05:00:00+08:00\",\"dateModified\":\"2026-11-01T16:15:52+08:00\",\"inLanguage\":\"de-DE\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#webpage\"},\"articleSection\":\"blog\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/richarms.com\\\/de\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/category\\\/blog#listItem\",\"name\":\"blog\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/category\\\/blog#listItem\",\"position\":2,\"name\":\"blog\",\"item\":\"https:\\\/\\\/richarms.com\\\/de\\\/category\\\/blog\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#listItem\",\"name\":\"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#listItem\",\"position\":3,\"name\":\"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/category\\\/blog#listItem\",\"name\":\"blog\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#organization\",\"name\":\"Richarms International Limited\",\"description\":\"Richarms Bag Hardware is a leading manufacturer specializing in magnetic snaps, metal bag hardware, and custom fittings, with 23 years of experience since 2003. We offer wholesale and custom hardware solutions to global brands.\",\"url\":\"https:\\\/\\\/richarms.com\\\/de\\\/\",\"telephone\":\"+8615820655200\",\"foundingDate\":\"2003\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/richarms.com\\\/wp-content\\\/uploads\\\/2018\\\/10\\\/logo-53.png\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems\\\/#organizationLogo\",\"width\":374,\"height\":53,\"caption\":\"The Richarms logo, with its vibrant yellow and blue colors and the iconic blue magnetic snap in the letter 'C', represents our expertise in creating high-quality, customizable hardware solutions for diverse industries.\"},\"image\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/richarmsbaghardware\",\"https:\\\/\\\/x.com\\\/Richarms2003\",\"https:\\\/\\\/www.instagram.com\\\/richarmshardware\\\/\",\"https:\\\/\\\/www.tiktok.com\\\/@richarmshardware\",\"https:\\\/\\\/www.pinterest.com\\\/richarmsaccessoriesgroups\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCj3EYWSybfLuZRCZQWIt2pA\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/13256838\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/author\\\/riharms#author\",\"url\":\"https:\\\/\\\/richarms.com\\\/de\\\/author\\\/riharms\",\"name\":\"riharms\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2ba9742d6c486f2ae950b18bd4fa3b6274148d5804208e6cabc0c05cd5e82586?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"riharms\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#webpage\",\"url\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems\",\"name\":\"Magnetic Snap Installation Problems: Checks | Richarms\",\"description\":\"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.\",\"inLanguage\":\"de-DE\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/author\\\/riharms#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/author\\\/riharms#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/richarms.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/richarms-installation-slots.jpg\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems\\\/#mainImage\",\"width\":800,\"height\":800,\"caption\":\"Prepare holes or slots for the specified attachment before setting the hardware.\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/blog\\\/magnetic-snap-installation-problems#mainImage\"},\"datePublished\":\"2026-11-03T05:00:00+08:00\",\"dateModified\":\"2026-11-01T16:15:52+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#website\",\"url\":\"https:\\\/\\\/richarms.com\\\/de\\\/\",\"name\":\"Richarms\",\"description\":\"Richarms\",\"inLanguage\":\"de-DE\",\"publisher\":{\"@id\":\"https:\\\/\\\/richarms.com\\\/de\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Magnetic Snap Installation Problems: Checks | Richarms<\/title>\n\n","aioseo_head_json":{"title":"Magnetic Snap Installation Problems: Checks | Richarms","description":"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.","canonical_url":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#article","name":"Magnetic Snap Installation Problems: Checks | Richarms","headline":"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment","author":{"@id":"https:\/\/richarms.com\/de\/author\/riharms#author"},"publisher":{"@id":"https:\/\/richarms.com\/de\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-slots.jpg","width":800,"height":800,"caption":"Prepare holes or slots for the specified attachment before setting the hardware."},"datePublished":"2026-11-03T05:00:00+08:00","dateModified":"2026-11-01T16:15:52+08:00","inLanguage":"de-DE","mainEntityOfPage":{"@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#webpage"},"isPartOf":{"@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#webpage"},"articleSection":"blog"},{"@type":"BreadcrumbList","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/#listItem","position":1,"name":"Home","item":"https:\/\/richarms.com\/de\/","nextItem":{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/category\/blog#listItem","name":"blog"}},{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/category\/blog#listItem","position":2,"name":"blog","item":"https:\/\/richarms.com\/de\/category\/blog","nextItem":{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#listItem","name":"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment"},"previousItem":{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#listItem","position":3,"name":"Magnetic Snap Installation Problems: Loose Fixing, Deformation and Misalignment","previousItem":{"@type":"ListItem","@id":"https:\/\/richarms.com\/de\/category\/blog#listItem","name":"blog"}}]},{"@type":"Organization","@id":"https:\/\/richarms.com\/de\/#organization","name":"Richarms International Limited","description":"Richarms Bag Hardware is a leading manufacturer specializing in magnetic snaps, metal bag hardware, and custom fittings, with 23 years of experience since 2003. We offer wholesale and custom hardware solutions to global brands.","url":"https:\/\/richarms.com\/de\/","telephone":"+8615820655200","foundingDate":"2003","logo":{"@type":"ImageObject","url":"https:\/\/richarms.com\/wp-content\/uploads\/2018\/10\/logo-53.png","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#organizationLogo","width":374,"height":53,"caption":"The Richarms logo, with its vibrant yellow and blue colors and the iconic blue magnetic snap in the letter 'C', represents our expertise in creating high-quality, customizable hardware solutions for diverse industries."},"image":{"@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#organizationLogo"},"sameAs":["https:\/\/www.facebook.com\/richarmsbaghardware","https:\/\/x.com\/Richarms2003","https:\/\/www.instagram.com\/richarmshardware\/","https:\/\/www.tiktok.com\/@richarmshardware","https:\/\/www.pinterest.com\/richarmsaccessoriesgroups\/","https:\/\/www.youtube.com\/channel\/UCj3EYWSybfLuZRCZQWIt2pA","https:\/\/www.linkedin.com\/company\/13256838\/"]},{"@type":"Person","@id":"https:\/\/richarms.com\/de\/author\/riharms#author","url":"https:\/\/richarms.com\/de\/author\/riharms","name":"riharms","image":{"@type":"ImageObject","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/2ba9742d6c486f2ae950b18bd4fa3b6274148d5804208e6cabc0c05cd5e82586?s=96&d=mm&r=g","width":96,"height":96,"caption":"riharms"}},{"@type":"WebPage","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#webpage","url":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems","name":"Magnetic Snap Installation Problems: Checks | Richarms","description":"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.","inLanguage":"de-DE","isPartOf":{"@id":"https:\/\/richarms.com\/de\/#website"},"breadcrumb":{"@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#breadcrumblist"},"author":{"@id":"https:\/\/richarms.com\/de\/author\/riharms#author"},"creator":{"@id":"https:\/\/richarms.com\/de\/author\/riharms#author"},"image":{"@type":"ImageObject","url":"https:\/\/richarms.com\/wp-content\/uploads\/2026\/10\/richarms-installation-slots.jpg","@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems\/#mainImage","width":800,"height":800,"caption":"Prepare holes or slots for the specified attachment before setting the hardware."},"primaryImageOfPage":{"@id":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems#mainImage"},"datePublished":"2026-11-03T05:00:00+08:00","dateModified":"2026-11-01T16:15:52+08:00"},{"@type":"WebSite","@id":"https:\/\/richarms.com\/de\/#website","url":"https:\/\/richarms.com\/de\/","name":"Richarms","description":"Richarms","inLanguage":"de-DE","publisher":{"@id":"https:\/\/richarms.com\/de\/#organization"}}]},"og:locale":"de_DE","og:site_name":"Richarms \u00bb Richarms","og:type":"article","og:title":"Magnetic Snap Installation Problems: Checks | Richarms","og:description":"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.","og:url":"https:\/\/richarms.com\/de\/blog\/magnetic-snap-installation-problems","article:published_time":"2026-11-02T21:00:00+00:00","article:modified_time":"2026-11-01T08:15:52+00:00","article:publisher":"https:\/\/www.facebook.com\/richarmsbaghardware","twitter:card":"summary","twitter:site":"@Richarms2003","twitter:title":"Magnetic Snap Installation Problems: Checks | Richarms","twitter:description":"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.","twitter:creator":"@Richarms2003"},"aioseo_meta_data":{"post_id":"8914","title":"Magnetic Snap Installation Problems: Checks | Richarms","description":"Diagnose magnetic snap installation problems by separating loose fixing, deformation and misalignment. Check the stack and tooling before changing settings.","keywords":null,"keyphrases":{"focus":{"keyphrase":"magnetic snap installation problems","score":86},"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":"","og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"Article","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":"-1","robots_max_videopreview":"-1","robots_max_imagepreview":"large","priority":0,"frequency":"default","location":null,"local_seo":null,"seo_analyzer_scan_date":"2026-11-02 21:02:40","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":"0","open_ai":null,"ai":{"faqs":[],"keyPoints":[],"schemas":[],"titles":[],"descriptions":[],"socialPosts":{"email":{"subject":"","preview":"","content":""},"linkedin":[],"twitter":[],"facebook":[],"instagram":[]}},"created":"2026-10-21 07:05:09","updated":"2026-11-02 21:02:40","focus_keyword":"magnetic snap installation problems","additional_keywords":null,"truseo_locale":null},"permalink_manager":null,"_links":{"self":[{"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/posts\/8914","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/comments?post=8914"}],"version-history":[{"count":2,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/posts\/8914\/revisions"}],"predecessor-version":[{"id":8922,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/posts\/8914\/revisions\/8922"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/media\/8906"}],"wp:attachment":[{"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/media?parent=8914"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/categories?post=8914"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/richarms.com\/de\/wp-json\/wp\/v2\/tags?post=8914"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}