Double rivet press dies are setting tools for the corresponding double-rivet magnetic snap components. They suit production setups that use a compatible press to attach the two closure halves to their respective material sections.
Double Rivet Press Dies
Descripción
Double rivet press dies are setting tools for the corresponding double-rivet magnetic snap components. They suit production setups that use a compatible press to attach the two closure halves to their respective material sections.
The tools must support the visible caps and magnetic bodies correctly. A mismatched cavity can leave marks or deform a component even when the press appears to close normally.
Support both sides of a double-rivet assembly
Select the RC-DR machine-tool reference against the exact 14 or 18 mm snap variant and cap dimensions. Then confirm the machine’s upper connection, lower seat and available working clearance. A hand-setting tool with a similar cavity is not automatically a press-compatible replacement.
Use the complete production material stack for the setting trial. Check each closure half separately before testing the mated pair. Inspect the cap seating, material compression and opening action; a tight-looking attachment is not enough if the magnetic face has been distorted.
Snap details the double-rivet dies must match
Send the snap model, photographs of both sides, cap or eyelet dimensions and the total material thickness. Identify the tool components you already have and the installation method you intend to use.
Tooling supplied for a Richarms product must match that particular product specification. Neither a similar appearance nor the same nominal diameter proves compatibility with another manufacturer’s hardware. Ask for a fit check when the product or tool source changes.
Tool references: Iron tooling; RC-DR1420MT, RC-DR1435MT, RC-DR1820MT, RC-DR1840MT and RC-DR1845MT references.
Press trials on both rivet positions
Agree a sample-setting trial before releasing a tool combination for production. Check the installed part for looseness, rotation, deformation, visible marks and proper magnetic engagement. Include the backing or reinforcement used in the finished article.
Keep the approved product, tool reference and setup record together. If a later material batch changes thickness or firmness, repeat the fitting check. More setting force is not a reliable remedy for an incorrect rivet length or a mismatched support profile.
Questions about double rivet press dies
Does double rivet mean two press strokes at once?
It describes the snap fastening arrangement, not a guaranteed simultaneous machine cycle. Confirm the setup and supplied tool components.
Can one die cover every cap diameter?
No. The support profile must match the cap. Confirm any alternative cap sizes before selecting the tooling.
Are the tools universal between manufacturers?
No. Product geometry and tooling connections may differ. Provide samples or drawings for a compatibility assessment.
What should be checked before production?
Approve the tool fit and a finished-material setting sample, including appearance, attachment stability and closure operation.
Hand tools and single-rivet press dies
Compare double rivet hand tools, custom double rivet snaps, single rivet press dies when reviewing a different structure or installation route.
Send your double-rivet drawing for die matching
Send the product reference, application photographs or drawing, required finish and planned quantity through our product inquiry page. Include the matching-part or material details so we can review the correct version and confirm the next sampling step.
Spanish 
English 
French 
Italian 
Portuguese 
Turkish 
Korean 
Japanese 
German 
Dutch