Richarms offset prong magnetic snaps are designed with staggered male and female prong positions. Unlike a standard magnetic snap, the prongs on the two mating parts do not occupy exactly the same upper and lower positions after installation.

This offset arrangement provides more room for planning the cuts, washers, reinforcement layers and bending directions. It is particularly useful for multilayer materials, bound-edge structures and installation areas where the available space is limited.

What Is an Offset Prong Magnetic Snap?

A conventional magnetic snap normally has symmetrical prong positions on its male and female parts. When both parts are installed in the same area, the upper and lower prongs may align with each other.

An offset prong magnetic snap places the prongs of the male and female components at different positions. This staggered construction helps prevent the two sets of prongs from occupying the same installation line.

Offset Prongs Are an Installation Solution

The offset design does not change the basic function of the magnetic closure. Its main purpose is to provide an alternative installation layout when standard aligned prongs are inconvenient for the product structure.

Advantages of Staggered Prong Positions

Reduced Upper-and-Lower Prong Overlap

Because the male and female prong positions are staggered, the two sets of prongs are less likely to meet at the same point within the material assembly.

This can be useful when the product has limited internal space or when several hardware and reinforcement components must be installed close together.

More Flexible Installation Planning

The offset arrangement gives product developers more options when determining where to cut the material and how to bend each prong.

The prongs may be bent inward or outward depending on the material thickness, washer arrangement, available space and required surface profile.

Suitable for Multilayer Materials

Offset prong magnetic snaps may be considered for:

• Thick or multilayer bag materials
• Leather and fabric laminations
• Bound-edge and folded-edge structures
• Reinforced bag panels
• Packaging with internal support layers
• Positions with restricted installation space

Offset Prongs vs Standard Prongs

Offset prongs are not automatically better for every product. The appropriate construction should be selected according to the material, reinforcement, available installation area and production method.

Inward and Outward Prong Bending

Inward Bend

An inward bend keeps the prongs closer to the center of the washer or backing area. This may be useful when the outside installation area is restricted.

Outward Bend

An outward bend directs the prongs toward the outer area and may help distribute their positions across a wider installation surface.

The final bending direction should be verified with the actual material. Excessive bending, repeated bending or an unsuitable washer may reduce installation stability.

How to Choose the Correct Prong Configuration

Before ordering, please provide the following information:

• Total material thickness
• Number of material and reinforcement layers
• Available installation area
• Required inward or outward bending direction
• Magnetic holding-force requirement
• Surface finish and color
• Estimated order quantity

Photos, drawings or material samples can help our team confirm whether an offset, short, standard or long prong structure is more appropriate.

Other Magnetic Snap Prong Options

Richarms supplies different prong constructions for different material assemblies:

• Short Prong Magnetic Snaps for thin materials and lower-profile installation
• Long Prong Magnetic Snaps for thick or multilayer materials
• Standard prong magnetic snaps for general bag and packaging applications
• Offset prong magnetic snaps for staggered installation positions

Custom Magnetic Snap Manufacturing

Richarms is a magnetic snap manufacturer serving bag factories, leather-goods manufacturers, packaging suppliers, brands, importers and hardware distributors.

Available customization options include:

• Different magnetic holding-force levels
• Custom plating and painted colors
• Laser marking, deep laser marking and tooling logos
• Alternative prong positions and lengths
• Different washers and reinforcement components
• Individual or bulk packaging

Final dimensions, materials, finishes and installation methods should be confirmed through an approved sample before mass production.

Request a Sample or Factory Quotation

Send Richarms your material thickness, product drawing, installation-space requirements, finish, quantity and target magnetic strength. Our team can recommend a suitable prong layout and prepare samples for testing.

Contact Richarms for offset prong magnetic snap samples, technical recommendations and a factory quotation.

Questions fréquemment posées

What does “offset prong” mean?

It means that the male and female snap prongs are positioned at different locations. The staggered positions help prevent the two sets of prongs from occupying the same installation line.

Is an offset prong snap stronger than a standard snap?

The offset construction mainly changes the installation layout. Magnetic holding force depends on the magnet configuration, product size and complete snap structure rather than the prong position alone.

Where are offset prong magnetic snaps used?

They are commonly considered for multilayer materials, reinforced panels, bound edges and structures with limited space for cutting and bending the prongs.

Can the prongs be bent inward or outward?

Yes. The appropriate bending direction depends on the material, washer arrangement and available installation area. Sample testing is recommended.

Can Richarms customize the finish and magnetic strength?

Yes. Custom finishes, logos, packaging and magnetic holding-force options are available, subject to the required specification and order quantity.

18mm thick short-prong magnetic snap with anti-rotation teeth and a rack-plated finish.

Richarms short prong magnetic snaps are designed for thin leather, fabric, coated paper, covered boxes and other applications where standard prongs may be longer than necessary.

The 18mm version uses a 7.1mm short-prong design. After installation, the shorter prongs can form a lower-profile connection and help reduce prong overlap or visible bulging on thin materials.

As a magnetic snap manufacturer, Richarms can adjust the finish, magnetic holding force, packaging and logo according to your product and target market.

Why Choose Short Prong Magnetic Snaps?

Lower-Profile Installation

On thin material, standard prongs may overlap excessively after they are bent inward. This can create a thicker installation area or cause the covered surface to bulge.

Short prongs require less bending space and can provide a flatter, cleaner installation when matched with a suitable material thickness.

Suitable for Thin Materials

Typical applications include:

• Thin leather and synthetic leather
• Fabric handbags and wallets
• Fabric-covered gift boxes
• Pencil cases and stationery products
• Lightweight packaging and presentation boxes
• DIY bags and small leather goods

Reliable Magnetic Closure

The snap uses a brass shell, steel backing components and an NdFeB magnet. Different magnetic holding-force options can be supplied according to the opening feel, product structure and material strength required by the customer.

Short, Standard, Long and Offset Prongs

The correct prong style depends on the total material thickness, reinforcement layers, washer configuration and desired bending direction.

For thicker materials, see our Long Prong Magnetic Snaps. For the classic round version, see our Round Magnetic Snaps.

omparison of four magnetic snap prong styles and two installation bending methods.

Inward Bend and Outward Bend Installation

Magnetic snap prongs may be bent inward or outward depending on the material, washer, available installation area and required surface profile.

Inward Bend

An inward bend keeps the prongs within the washer area. Short prongs are particularly useful when an inward bend is required on thin material because they can reduce excessive overlap.

Outward Bend

An outward bend distributes the prongs toward the outer edges. This method requires sufficient installation space and should be tested with the actual material and reinforcement structure.

We recommend sample testing before mass production because material compression and reinforcement layers can affect the final fit.

18mm Short Prong Magnetic Snap Specifications

Dimensions are based on the displayed configuration. Final specifications should be confirmed against the approved sample before production.

Component dimensions and available finishes for the 18mm short prong magnetic snap.

Custom Magnetic Snap Manufacturing

Richarms supports standard production and lightweight customization for brands, bag factories, packaging manufacturers, importers and hardware distributors.

Available options include:

• Different magnetic holding-force levels
• Custom plating and painted finishes
• Laser marking, deep laser marking and tooling logos
• Individual or bulk packaging
• Alternative washers and backing components
• Short, standard, long and offset prong configurations

Request Samples or a Factory Quotation

Send us your material thickness, product application, required finish, estimated order quantity and magnetic holding-force requirement. Our team will recommend a suitable prong configuration and prepare samples for installation testing.

Contact Richarms for samples, technical recommendations and a factory quotation for custom short prong magnetic snaps.

Questions fréquemment posées

What materials are short prong magnetic snaps suitable for?

They are mainly intended for thin leather, synthetic leather, fabric, covered boxes and lightweight layered materials. Sample testing is recommended for every new material combination.

What is the prong length?

The displayed short-prong version has a prong length of approximately 7.1mm.

What is the difference between short and standard prongs?

Short prongs require less bending space and can help reduce overlapping or bulging on thin materials. Standard prongs are suitable for more common material thicknesses.

Can Richarms customize the magnetic strength?

Yes. Different magnetic configurations can be selected according to the required opening feel, application and material strength.

Can the color and logo be customized?

Yes. Richarms supports custom plating, painted colors, laser marking, deep laser marking and tooling logos, subject to the design and order quantity.

Notre Fermoir magnétique à pince est une solution polyvalente et facile à installer pour diverses applications telles que les vêtements, les sacs, les fourre-tout écologiques, les rideaux, etc. Conçu pour être pratique, ce fermoir peut être installé sans trous ni machines. Il suffit de le fixer à l'aide d'une pince, ce qui en fait un choix idéal pour les projets professionnels et les projets de bricolage.

Fermoir magnétique en gros de Chine pour la mode et l'usage domestique

• Installation par serrage: Facile à installer avec des pinces, pas besoin de trous ou de machines.
• Compact mais solide: Petite taille 20x14mm avec une force magnétique puissante (8N, 9N, 10N, 12N).
• Construction métallique durable: Résistant à l'usure et à la corrosion, parfait pour une utilisation quotidienne.
• Applications polyvalentes: Idéal pour les vêtements, les sacs, les rideaux et les accessoires de maison.
• Couleurs et forces personnalisables: Disponible en or, argent, laiton antique, bronze, etc.

Conception compacte mais puissante: The round female part measures just 20x14mm, making it compact yet strong enough to ensure a secure hold. Despite its small size, it offers high magnetic strength, capable of providing 8N, 9N, 10N, and even 12N of pull force. For projects requiring stronger or customized magnetic strength, we can tailor the product to your needs.

Construction métallique de haute qualité: Fabriqué à partir de matériaux de première qualité, ce fermoir magnétique présente une durabilité et une résistance à l'usure exceptionnelles. Le design sans couture ajoute une touche sophistiquée, rehaussant l'aspect des sacs à main, des vêtements et d'autres accessoires.

Fermeture magnétique forte: La forte traction magnétique garantit que le fermoir reste fermement en place, évitant ainsi les ouvertures accidentelles. Qu'il s'agisse de mode ou d'utilité, ces fermoirs garantissent la sécurité de vos articles.

Installation facile: Aucun outil ou procédure complexe n'est nécessaire. Il suffit de fixer le bouton magnétique sur le tissu ou d'autres matériaux à l'aide d'une pince. L'installation est rapide et facile, ce qui la rend parfaite pour les fabricants professionnels et les bricoleurs.

Applications polyvalentes: Ces fermoirs magnétiques conviennent à un large éventail d'utilisations, notamment pour les vêtements, les sacs à main et la décoration intérieure. Leur flexibilité leur permet d'être utilisés dans une variété de projets créatifs, améliorant à la fois la fonctionnalité et l'esthétique.

Large gamme de couleurs et d'intensités: Disponibles dans des finitions standard telles que l'or, l'argent, le laiton antique et le bronze, nos fermoirs magnétiques peuvent être personnalisés pour répondre à vos besoins en matière de design. Que vous souhaitiez un look subtil ou saisissant, nous avons la couleur et la finition qui conviennent. Nous proposons également une gamme de forces de traction allant de 8N à 12N, avec la possibilité de personnaliser pour des applications plus exigeantes.

Matériau :

Capsule femelle : Acier, cuivre ou acier inoxydable
Capsule mâle : Acier

Finish :
Coup de poing masculin : uni, texte, logo

Régulier Couleur répertoriée :

Envoyez un courriel pour obtenir d'autres photos de couleurs, comme Spray Black, Rainbow, Pearl Nkl, Pearl Gold, Brush Nkl, Brush Gold, etc.

Quelle est la différence entre la qualité de suspension et la qualité de roulement ?

Tool-Free Magnetic Snap Bag Clip for DIY Projects

Le Clip magnétique pour sac à main is designed for DIY bag making, bag upgrades and quick closure replacement. It can be clamped onto a finished bag edge without punching holes, sewing or using installation tools. This makes it practical for makers, repair shops, craft brands and customers who want to add a magnetic closure to an existing bag.

The clip-on structure can work with a wide range of material thicknesses. For the best fit, the clip gap and magnetic strength should be matched to the actual leather, fabric, canvas or layered bag edge. Samples are recommended before bulk production.

How the Clamp-On Magnetic Closure Works

Attach It to a Finished Bag Without Tools

Position the magnetic edge clip on the selected bag opening, press it into place and check that both sides align correctly. No special press machine is required for normal installation, so the closure is convenient for small-batch DIY work and finished-product upgrades.

Suitable for Different Material Thicknesses

Thin fabric, lined canvas, PU, leather and multilayer bag edges may require different clip clearances. Richarms can help B2B buyers compare sizes and select a suitable structure based on material samples or thickness information.

Removable and Flexible for Prototyping

The clip-on design is useful during sampling because it allows designers to test the closure position, appearance and opening feel before confirming the final bag design.

Popular DIY and Bag Applications

Handmade Bags and Craft Projects

Add a clean magnetic closure to handmade handbags, pouches, wallets, organizer bags and fabric crafts without investing in installation equipment.

Finished Bag Upgrades and Repairs

The Magnetic Snap Bag Clip can be added to an existing tote, handbag or pouch when the original bag has no closure or needs a convenient replacement.

Small-Batch Brands and Sample Rooms

Design studios, sample rooms and independent brands can quickly test magnetic closure concepts on different bag materials and styles.

Home and Decorative Textile Uses

Depending on the clip specification, the product can also be evaluated for curtains, organizers and other removable textile closures.

Why Buy from Richarms Factory?

Richarms is a magnetic button and bag hardware factory serving B2B buyers, importers, wholesalers, bag manufacturers and private-label brands. We support product selection, sampling, OEM development and bulk supply.

• Factory-direct magnetic closure supply
• Multiple clip sizes, finishes and magnetic force options
• OEM color, logo and packaging evaluation
• Sample support for material and thickness testing
• Batch inspection for appearance, fit and magnetic performance
• Stable B2B production and export coordination

Customization and B2B Ordering

To recommend the right magnetic clip, please send the bag type, edge material, total thickness, preferred finish, required quantity and target magnetic strength. Photos, drawings or physical material samples help our team confirm the most suitable option.

For more factory options, view our magnetic button and bag closure collection.

Questions fréquemment posées

Does installation require a tool?

No special installation tool is normally required. The clip is designed to attach directly to the edge of a finished bag.

Can it fit different bag thicknesses?

Yes, different clip specifications can accommodate a range of material thicknesses. Share the finished edge thickness so we can recommend the correct fit.

Can I use it for an existing bag?

Yes. It is suitable for adding a magnetic closure to many finished totes, handbags, pouches and DIY bag projects.

Can Richarms supply samples and bulk orders?

Yes. We support sample evaluation, OEM requirements and factory-direct bulk supply for B2B customers.

What information is needed for a quotation?

Please provide the application, material thickness, finish, quantity, packaging requirement and any available photos or drawings.

Request Samples or a Factory Quote

Need a tool-free magnetic closure for your bag project? Send Richarms your bag photos, material thickness and estimated order quantity. Our factory team will recommend a suitable Magnetic Snap Bag Clip, prepare sample options and provide a B2B quotation.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

Caractéristiques principales:

• 14mm extra-long prongs for thick materials like leather and canvas
• Strong magnetic hold for added security and durability
• Available in various colors and finishes to match your designs
• Perfect for heavy-duty applications in fashion and accessories
• Customizable pull strengths and colors to suit your specific needs

Notre boutons-pression magnétiques ensure that every product, from bags to garments, is equipped with a reliable and stylish closure, making your products stand out with both form and function.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

14mm Long Prong Magnetic Snaps for Thick Material

Long prong magnetic snaps are the extended-prong option in our classic round magnetic snap range. The 15mm prongs provide additional installation depth for thick leather, canvas, multilayer fabrics and reinforced product structures

This model keeps the familiar appearance and convenient operation of a round magnetic snap while providing longer prongs than the standard version. It is suitable for bag factories, leather-goods manufacturers, packaging producers and other B2B customers working with thicker materials.

RC-L1845 – 14mm Prongs Product Specifications

The 14mm prongs are designed for applications where standard prongs may not provide sufficient installation depth. The finished assembly should be tested with the customer’s actual material thickness before mass production.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

Where to Use Long Prong Magnetic Snaps

The long-prong magnetic snap is suitable for material stacks up to approximately 9mm thick. In the installation shown, the measured thickness is 6.8mm and the folded prongs already overlap securely. An additional thickness of about 2mm (up to 9mm)is generally workable, subject to the material’s compressibility, washer selection and sample testing.

Installation test at 6.8mm thickness; the overlapping prongs provide allowance for approximately 2mm of additional material.

Thick Leather Bags

The extended prongs can pass through thicker leather layers, reinforcement materials and linings used in handbags, backpacks, briefcases and other leather goods.

Canvas and Heavy Textiles

The extended prongs can pass through thicker leather layers, reinforcement materials and linings used in handbags, backpacks, briefcases and other leather goods.

Packaging and Presentation Boxes

They can also be evaluated for fabric-covered boxes, presentation packaging and other structures where the magnetic snap must pass through a thicker material stack.

Material and Magnetic Strength Options

Component Materials

The female snap can be produced in steel, brass or stainless steel. The male component is available in steel. Washer and surface-finish options can be selected according to the material thickness, corrosion requirement, target price and product positioning.

Standard and Strong Magnet Options

Standard ferrite magnet configurations are available for general applications. Stronger configurations using neodymium magnets can be developed when greater holding force is required. The complete product should be tested to confirm opening force and material load capacity.

Richarms, the Chinese Wholesale Professional Magnetic Snaps Factory has different strength option for thin or thick magnetic snaps, standard solution is from 0.5kg – 5kg, customized strength solution available. The image is showing our standard Strength: 18mm Thick (1.5kg / 3kg) 14mm Thick (0.5kg / 1.5kg)

Colors, Finishes and Custom Logos

Available finishes include nickel, gold, gunmetal, rose gold, antique finishes and other custom colors. Logo options include laser engraving, deep laser engraving and custom tooling, subject to artwork and order requirements.

Custom attachment options for magnetic snaps, including long, short and pointed prongs plus rivet structures.

Long Prongs Within the Round Magnetic Snap Range

This product is the long-prong version of our round magnetic snaps for bags. Choose the standard-prong model for ordinary material thicknesses and the 15mm long-prong model when additional installation depth is required.

Why Source Long Prong Magnetic Snaps from Richarms?

Richarms is a magnetic snap manufacturer supporting brands, bag factories, leather-goods manufacturers and hardware distributors. We provide material matching, magnetic-strength selection, color development, custom logos, sample verification and bulk production.

Request Samples and a Factory Quote

Send us your material type, total thickness, required color, magnetic strength, order quantity and logo requirements. Our factory team will recommend a suitable component combination and prepare samples for testing.

Contact Richarms for 18mm long prong magnetic snap samples, OEM support and wholesale pricing.

Ces boutons-pression magnétiques en laiton sont très fins et très résistants, de sorte qu'ils s'intègrent parfaitement dans le matériau. L'épaisseur est de 2 mm, le diamètre est de 10 mm 12 mm 14 mm 18 mm, 8 mm peut être personnalisé, 20 mm dans une autre structure.
Ils constituent le choix idéal pour les applications où l'aspect est important et où une bonne tenue est préférable, comme les sacs à main en cuir, les fourre-tout, les sacs à main, les couvertures de journaux, les mini-massages, les sacs à dos et les sacs à provisions.
Le corps de l'aimant est encastré dans l'épaisseur du cuir, laissant un mince rebord extérieur qui affleure la surface du sac en cuir.

Demande de tarif pour les commandes groupées contactez-nous >>>>
Pour les petites commandes, veuillez vous adresser à notre boutique en ligne >>>

Liste des tailles de boutons-pression magnétiques extra-fins

Code	Taille	Coup de poing féminin TH	Pression L	Aimant Taille	Photo	Description
RC-E1020	Bouton-pression magnétique de 10 mm	2mm	6,2 mm	9,8 mm	Boutons-pression magnétiques extra-fins de 10 mm	Un aimant puissant dans un très petit format. Pour les petits sacs à main en cuir, les mini-portefeuilles, les étuis à lunettes, les jouets et les connexions électroniques pour les petits appareils tels que les masseurs oculaires.
RC-E1220	Fermeture magnétique de 12 mm	2mm	7,6 mm	11,5 mm	Boutons-pression magnétiques extra-fins de 12 mm	Idéal pour les petits sacs à main, les portefeuilles de poche et les emballages. Face affleurante et petit diamètre.
RC-E1420	Bouton-pression magnétique de 14 mm	2mm	7,6 mm	11 mm	Boutons-pression magnétiques extra-fins de 14 mm	Corps mince. Résistance standard. Des boutons-pression élégants et très tendance pour les sacs à main, les bagages, les étuis et les couvertures de journaux.
RC-E1820	Bouton-pression magnétique de 18 mm	2mm	9 mm	12 mm	Boutons-pression magnétiques extra-fins de 18 mm	Corps fin avec un grand pouvoir de rétention. Pour les sacs à main, les fourre-tout, les bagages, les sacs à dos, l'emballage, l'automobile et l'aérospatiale.

Richarms propose différentes puissances d'aimant pour toutes les solutions de marché.

La puissance d'une fermeture magnétique est déterminée par la taille et la force de l'aimant utilisé dans sa construction. Des aimants plus grands et plus puissants assurent une fermeture plus forte, tandis que des aimants plus petits assurent une fermeture plus faible. Certains boutons-pression magnétiques sont également réglables, ce qui permet aux utilisateurs d'adapter la puissance de la fermeture à leurs préférences.

Richarms propose une solution professionnelle pour les sacs à main, les sacs à dos, les couvertures de journaux, les coffrets cadeaux et bien d'autres choses encore.

Richarms, l'entreprise chinoise de fabrication en gros de boutons magnétiques professionnels, propose différentes options de résistance pour les boutons magnétiques minces ou épais. La solution standard est de 0,5 kg à 5 kg, et des solutions de résistance personnalisées sont disponibles.
L'image montre notre force standard :
18mm d'épaisseur (1.5kg / 3kg)
14mm d'épaisseur (0.5kg / 1.5kg)

Comment les boutons-pression magnétiques sont-ils produits ?

La partie femelle d'un bouton magnétique contient généralement l'aimant, tandis que la partie mâle contient un matériau ferromagnétique attiré par l'aimant, tel que le fer ou l'acier, qui est magnétisé.

Quel est le détail que nous aimerions confirmer avec vous lorsque vous avez besoin d'une solution parfaite pour votre sac à main, vos vêtements ou votre mini-appareil électrique ?

Étape 1 : Choix du matériau
Capsule femelle : Fer, laiton commun ou laiton écologique disponibles
Gélule mâle : Fer

Étape 2 : Choisir Ftypes de vernis
Snap femelle : uni, motif, logo

Coup de poing masculin : uni, texte, logo

Étape 3 : Choisir la couleur des boutons-pression magnétiques

Envoyez un courriel pour d'autres options de couleurs, comme le noir pulvérisé, le noir époxy, l'arc-en-ciel, le nickel nacré (nickel mat), l'or nacré, le nickel brossé, l'or brossé, l'argent antique, le noir antique, etc.

Quelle est la différence entre les boutons-pression magnétiques suspendus et les boutons-pression magnétiques roulants ?

L'électrodéposition se divise en trois catégories : l'électrodéposition suspendue, l'électrodéposition par rouleaux, l'électrodéposition continue et l'électrodéposition par brosses, principalement en fonction de la taille et du lot de pièces à électrodéposer.

Le placage suspendu et le placage au rouleau sont deux méthodes différentes de galvanoplastie, un processus dans lequel une fine couche de métal est déposée sur la surface d'un matériau conducteur. Le dépôt suspendu consiste à suspendre l'objet à déposer dans une solution contenant les ions métalliques souhaités, à l'aide d'un fil ou d'un autre mécanisme de suspension. Cela permet de recouvrir uniformément toute la surface de l'objet avec le métal. La métallisation au rouleau, en revanche, consiste à faire passer l'objet à métalliser dans une solution d'ions métalliques à l'aide d'un rouleau ou d'une bande transporteuse. Cette méthode est plus efficace pour revêtir des objets complexes ou de grande taille, mais elle peut entraîner une couverture inégale ou des zones manquantes.

Nos emballages pour différents types de fermetures de sacs à main
Toutes les tailles de boutons magnétiques peuvent être fournies avec des pattes, des tiges ou des rivets.
1 jeu = 1 mâle, 1 femelle, 2 rondelles
Fermetures magnétiques de 10 mm : 400 jeux/boîte, 20 ou 30 boîtes/carton
Fermetures magnétiques de 12 mm : 200 jeux/boîte, 20 ou 30 boîtes/carton
Fermetures magnétiques de 14 mm : 200 jeux/boîte, 20 ou 30 boîtes/carton
Fermetures magnétiques de 18 mm : 100 jeux/boîte, 20 ou 30 boîtes/carton

Qu'est-ce qu'une agrafeuse magnétique ?

Les boutons-pression magnétiques sont de petits aimants souvent utilisés dans les vêtements et les accessoires, tels que les sacs à main et les sacs, pour fermer l'article en toute sécurité. Lorsque deux boutons-pression magnétiques sont placés l'un près de l'autre, les aimants s'attirent et s'emboîtent, maintenant l'article fermé. Ils constituent une alternative pratique et facile à utiliser aux fermetures traditionnelles, telles que les boutons ou les fermetures à glissière.

Étude de cas

Introduction aux boutons-pression magnétiques double face

Les boutons-pression magnétiques double face sont des éléments essentiels dans l'industrie de la mode et des accessoires, car ils sont à la fois fonctionnels et esthétiques. Ces fermetures utilisent des aimants puissants des deux côtés, garantissant une solution de fixation sûre et sans faille pour divers produits. Leur design élégant et leurs performances fiables en font un choix privilégié pour les concepteurs et les fabricants.

Code et taille :

Code	Taille	Encliquetage femelle encliquetage mâle TH	Pression L	Aimant DIA	Photo	Description
RC-DS1420 RC-DS1820	14 mm 18mm	2mm 2mm	9 mm 9 mm	13 mm 17 mm	Fermeture magnétique double face de 18 mm, sûre et élégante, idéale pour les sacs à main et les accessoires.	Corps fin avec un grand pouvoir de rétention. Pour les sacs à main, les bagages, les sacs à dos, l'automobile et l'aérospatiale.

En fonction des exigences de votre projet, choisissez entre :​

• Support à pinces : Pour une insertion facile dans les matériaux, offrant une prise sûre.​
• Support à rivets : Offre une fixation solide, particulièrement utile pour les matériaux plus épais

Matériau :

Capsule femelle : Acier, laiton, acier inoxydable
Capsule mâle : Acier, laiton, acier inoxydable
Aimant intérieur : Aimant permanent en néodyme

Finish:
Boutons-pression féminins et masculins : uni, motif, logo

Pack：
Tous ces produits peuvent être fournis avec des pieds, des tiges ou des rivets.
1 jeu = 1 mâle, 1 femelle, 2 rondelles
10 mm : 400 jeux/boîte, 20 boîtes/carton
12mm/14mm : 200 jeux/boîte, 20 boîtes/carton
18mm : 100 jeux/boîte, 20 boîtes/carton

Finitions：
La finition standard est le snap femelle PLAIN, et le snap mâle PLAIN ou WORDING, avec possibilité de personnaliser le logo.
Les couleurs habituelles sont énumérées ci-dessous. Des finitions personnalisées sont également disponibles pour répondre à vos besoins, y compris, mais sans s'y limiter, un logo au laser, un revêtement époxy, un revêtement sous vide, une peinture.

Régulier Couleur répertoriée

Envoyez un courriel pour obtenir d'autres photos de couleurs, comme Spray Black, Rainbow, Pearl Nkl, Pearl Gold, Brush Nkl, Brush Gold, Rainbow, etc.

Services de personnalisation :

Pour garantir que nos boutons-pression magnétiques s'alignent parfaitement sur votre marque et votre vision du design, nous offrons :​

• Gravure du logo : Personnalisez le snap avec le logo de votre marque par gravure laser ou embossage.​
• Options de couverture : Améliorez l'aspect du bouton-pression en le recouvrant de matériaux assortis ou contrastés, tels que le cuir ou le tissu.​
• Formes et matériaux alternatifs : Au-delà de la forme ronde standard, nous pouvons créer des formes personnalisées et utiliser différents matériaux pour répondre à vos besoins spécifiques.
• Nous fournissons différentes puissances : Richarms propose différents matériaux NedFEB pour différentes exigences de résistance. La norme est N30, N33 N35 N38 N40 N42 N45 N48 N50 N52 N54 N56 disponible.
  • Aimant de même taille, meilleure qualité de matériau, puissance plus élevée, Aimant de même matériau, taille plus grande, puissance plus élevée.
  • Ce système à double aimant est très puissant, même si nous n'utilisons que le matériau standard N30.
  • La question n'est pas de savoir si le plus fort est le mieux, il faut voir quel est le matériau sur lequel on applique le produit : S'il s'agit d'un cuir épais et dur, c'est bon ; s'il s'agit d'un tissu fin et souple, trop de force endommagera le tissu, il vaudrait mieux suggérer l'utilisation d'un produit plus fort. Fermeture magnétique extra-finedont le côté mâle est dépourvu d'aimant.

Processus de collaboration

Un partenariat avec nous garantit une expérience fluide et efficace :​

1. Consultation : Discutez des exigences de votre projet, y compris les préférences en matière de conception, les quantités et les délais.​
2. Proposition de conception : Notre équipe vous fournira des maquettes et des échantillons pour approbation.​
3. Production : Après approbation, nous commençons la fabrication en respectant des mesures strictes de contrôle de la qualité.​
4. Livraison : Nous garantissons une expédition dans les délais, avec un suivi pour votre commodité.​

Applications

Nos boutons-pression magnétiques double face sont polyvalents et peuvent être intégrés de manière transparente dans divers produits, notamment :​

• Sacs à main et porte-monnaie : Garantit des fermetures sûres tout en conservant une apparence élégante.​
• Sacs à dos : Faciliter l'accès sans compromettre la sécurité.​
• Étuis à lunettes : Protégez vos lunettes grâce à une fermeture à bouton-pression fiable.​
• Pochettes pour ordinateurs portables : Combinez fonctionnalité et style pour les accessoires technologiques.​
• Journaux en cuir : Ajoutez une touche de sophistication aux carnets et aux agendas.

Conclusion

L'intégration de nos boutons-pression magnétiques double face dans vos produits garantit un mélange de fonctionnalité, de durabilité et d'attrait esthétique. Avec des options personnalisables et un engagement d'excellence, nous sommes votre partenaire de confiance pour la fourniture de fermetures de haute qualité pour vos créations.​

Pour petite commande ou de démarrer service personnalisé pour les boutons-pression magnétiques, s'il vous plaît nous contacter aujourd'hui.

Round Rainbow Magnetic Snaps for Bags

This classic round magnetic closure combines a decorative rainbow-plated surface with a practical snap-together opening. The finish changes between blue, purple, green and gold tones under different light, helping products stand out without changing the familiar installation method.

Choose the model according to product size, material thickness, target cost and required magnetic force. Custom finishes, logo marking and packing are available for volume orders.

Sizes and Model Options

RC-C1435 — 14mm Compact Magnetic Snap

Female shell thickness: 3.5mm; prong length: 7.6mm; magnet diameter: 13mm. This economical option suits small notebooks, card holders, phone pouches, promotional items and lightweight bags.

RC-C1840 — 18mm Standard Magnetic Snap

Female shell thickness: 3.8mm; prong length: 9mm; magnet diameter: 17mm. It provides a balanced profile and is widely used for handbags, wallets and general bag production.

RC-C1845 — 18mm Thick Magnetic Snap

Female shell thickness: 4.5mm; prong length: 9mm; magnet diameter: 17mm. This popular thicker profile is suitable for backpacks, leather bags, totes, briefcases and other everyday closures. Standard and stronger magnet configurations are available.

Need a lower-profile closure? View our extra-thin magnetic snaps or browse the complete magnetic snaps range.

Materials and Magnetic Strength

The male shell is normally steel. Female shells can be produced in steel, brass or stainless steel according to cost, corrosion resistance and application requirements.

Standard and Strong Magnet Options

Standard versions use a ferrite permanent magnet for general closures. For projects requiring greater holding force, a neodymium magnet can be added or substituted after application testing. Holding force should be selected together with fabric thickness, reinforcement and opening feel.

Rainbow Finish and Custom Branding

Rainbow vacuum plating creates a multicolor surface whose appearance varies by angle and lighting. Buyers may specify a rainbow top with a rainbow base or a rainbow top with a gold base. Other finishes include nickel, gold, gunmetal, rose gold, brushed nickel, brushed gold, pearl nickel, pearl gold and spray colors.

Logo and Surface Options

The female face can be plain, patterned or branded. The male component can carry standard wording or a custom logo. Available branding methods include laser marking, deep laser engraving and custom tooling.

Set Composition and Bulk Packing

One complete set contains one male part, one female part and two washers. Standard packing is 200 sets per box for 14mm models or 100 sets per box for 18mm models, with 20 boxes per carton. Packing can be adjusted for approved B2B orders.

Plating Quality and Applications

Hanging plating is suitable when appearance consistency and surface coverage are priorities. Barrel plating can be economical for suitable high-volume components. Our team recommends the process according to part geometry, finish target, order quantity and budget.

Rainbow magnetic snaps are used on handbags, backpacks, wallets, leather goods, notebooks, gift boxes, packaging and promotional products.

Request a Factory Quote

Richarms supports samples, material selection, magnetic-force matching, custom logo development, finishing and bulk production. Send us your required size, material thickness, finish, quantity and target holding force. Contact Richarms for samples or a B2B factory quotation.

Round magnetic snaps for bags are one of Richarms’ core products. This classic four-part closure includes a female magnetic snap, male snap and matching washers. It provides a convenient and reliable closure for canvas bags, gift boxes, pencil cases, leather bags and many other products.

Sample order or small order can placed on our Shopify directly.

Our standard range includes 14mm and 18mm magnetic snaps. Please refer to the existing specification table above for the exact dimensions of each model. Magnet strength, materials, surface finish and corrosion resistance can be configured according to the customer’s target price and quality requirements.

Magnetic snap specifications for 14mm and 18mm models, including component dimensions, pull force, weight and recommended applications.

If you are looking for extra thin option for your design, pls shop our Boutons-pression magnétiques extra-fins

Material Options for Magnetic Snap Components

Female Snap Materials

The female magnetic snap is available in iron, stainless steel and brass. Each material offers a different balance of cost, corrosion resistance and product positioning.

Male Snap Materials

The male snap is available in iron and stainless iron, also described as magnetic or ferritic stainless steel. The final material should be selected according to the required magnetic response, rust resistance and budget.

Washer Materials

Matching washers are available in iron, brass, plastic and stainless steel. We can recommend the washer material according to the fabric or leather thickness, installation method, corrosion requirement and finished-product appearance.

Choose the Right Material for Your Application

Economical Iron Magnetic Snaps

Iron is our highest-volume and most cost-effective option. It is widely used for canvas bags, promotional bags, gift boxes, pencil cases and other high-volume or frequently consumed products. Different plating and protective finishes are available according to the required price level.

Brass Magnetic Snaps for Leather Goods

Brass is commonly selected for handbags, luggage, leather accessories and premium leather goods. It is suitable for customers who prioritize material quality, corrosion performance and a higher-end product position.

Stainless Steel Options

Stainless steel provides better rust resistance than ordinary iron while generally costing less than brass. It is a practical choice for projects that require improved corrosion performance without moving to the highest material-cost level.

Salt Spray and Wash-Test Solutions

96-Hour Salt Spray Requirement

For projects with defined corrosion-resistance requirements, Richarms can configure material and finish combinations designed to meet a 96-hour salt spray test requirement. The applicable test standard, component combination, surface finish and approved sample must be confirmed before mass production.

Up to 30 Wash Cycles

Selected magnetic snap configurations can be developed for up to 30 wash cycles. Test results depend on the fabric, detergent, washing temperature, installation method and customer test procedure, so we recommend sample testing under the intended end-use conditions.

From Cost-Effective to Top-Quality B2B Solutions

Richarms is a magnetic snap manufacturer serving brands, bag factories, leather-goods manufacturers, packaging factories and accessory distributors. We provide solutions ranging from economical high-volume iron magnetic snaps to premium brass and corrosion-resistant stainless steel options.

Our team can support material selection, magnet-strength matching, plating and finish development, sample verification, packaging and bulk production. Instead of offering only one fixed specification, we recommend a practical solution based on your product, target price, quality standard and order quantity.

Force magnétique :

Adjustable magnetic power tailored to your specific requirements. Our stronger magnet options provide enhanced security for heavier materials or high-end designs.Options de résistance :
Puissance standard de l'aimant : Aimant permanent en ferrite
Puissance de l'aimant : Ajouter ou remplacer un aimant permanent en néodyme puissant

A professional domestic test to give you idea how strong Richarms magnetic snap

Richarms, the Chinese Wholesale Professional Magnetic Snaps Factory has different strength option for thin or thick magnetic snaps, standard solution is from 0.5kg – 5kg, customized strength solution available. The image is showing our standard Strength: 18mm Thick (1.5kg / 3kg) 14mm Thick (0.5kg / 1.5kg)

Comprehensive Customization Options

We offer comprehensive custom solutions, ensuring our magnetic snaps seamlessly integrate into your unique design vision:

Color Options:Régulier Couleur répertoriée

Wide selection including gold, nickel, rose gold, antique brass, gunmetal, and customizable finishes upon request.

Quelle est la différence entre la qualité de suspension et la qualité de roulement ?

Side-by-side comparison of hanging electroplating and rolling electroplating finishes for RICHARMS magnetic snaps, offering different color effects. Custom colors are available upon request.

Solutions d'emballage :

Personalized packaging available to enhance your brand identity and customer experience, ideal for gifting or retail presentation.All of these can be provided with Legs, Stems or Rivets.
1 jeu = 1 mâle, 1 femelle, 2 rondelles
14mm : 200 jeux/boîte, 20 boîtes/carton
18mm : 100 jeux/boîte, 20 boîtes/carton

Complete basic magnetic snap set featuring male, female snaps, and washers for secure installation.

Logo Customization:

Regular option

• • Snap femelle : uni, motif, logo
    

    Personalize your basic magnetic snaps with plain, patterned, or laser-engraved logo finishes.

  • Coup de poing masculin : uni, texte, logo
    

    Choose plain, molded wording, or laser logo finishes for your basic magnetic snap male caps.

     

Add your distinctive logo or branding through laser engraving, stamping, or custom molding, enhancing your product’s appeal and brand recognition.

Custom magnetic snap logo options: laser engraving, tooling and deep laser engraving.

Custom attachment options for magnetic snaps, including long, short and pointed prongs plus rivet structures.

Fast link: Short Prongs | Long Prongs | Long Rivet | Malposition Prongs | Point Prongs |

Applications for Round Magnetic Snaps

Canvas Bags and Promotional Products

For canvas bags and promotional items, iron components provide an economical solution for large production quantities. Different magnet strengths can be evaluated according to the fabric thickness and required opening force.

Gift Boxes and Pencil Cases

Round magnetic snaps provide a simple concealed closure for gift boxes, stationery cases and other frequently used products. Component and washer combinations can be adjusted to suit different material thicknesses.

Leather Bags and Premium Leather Goods

For handbags and leather accessories, brass or stainless steel options provide improved material performance. Finishes can be matched to the other metal accessories used in the finished product.

Custom magnetic snap solutions for medical devices, bags and apparel, packaging, everyday products, DIY crafts and stationery.

Les boutons-pression magnétiques RICHARMS sont utilisés dans la papeterie, les sacs et les emballages cadeaux. D'autres options de personnalisation sont disponibles pour des industries telles que les dispositifs médicaux.

For more inspiration, click here.

Installation:

Easy to install by creating two small prong holes in your chosen fabric or leather. Simply insert the snap, fold prongs outward, and secure it in place. DIY crafters can use common household tools like scissors, while industrial manufacturers benefit from specialized prong tools for rapid assembly.

Questions fréquemment posées

Which magnetic snap material is the most economical?

Iron is generally the most economical and widely used option, especially for canvas bags, gift boxes, pencil cases and high-volume products.

Which material offers better rust resistance?

Stainless steel provides better rust resistance than ordinary iron and is generally more economical than brass. Brass is commonly selected for premium bags and leather goods.

Can Richarms provide a 96-hour salt spray solution?

Yes. We can propose suitable material and finish combinations for a 96-hour salt spray requirement. The test standard and approved production sample must be confirmed before bulk manufacturing.

Can the magnetic snaps withstand 30 wash cycles?

Selected configurations can be developed for up to 30 wash cycles. We recommend testing the complete installed product because fabric, detergent, temperature and installation method can affect the result.

Should I choose a 14mm or 18mm magnetic snap?

The correct size depends on the product structure, fabric or leather thickness, required holding force and appearance. Send us your application details or material sample, and our factory team can recommend the appropriate model.

Request a Material Recommendation and Factory Quote

Tell us your application, material thickness, required size, order quantity, target price and corrosion or wash-test requirements. Richarms will recommend a suitable magnetic snap combination and prepare samples for evaluation.

Contact Richarms for samples, OEM support and a factory quotation for round magnetic snaps for bags.

Stem are attached so a decorative cap can be used.

Matériau :

Capsule femelle : Acier, cuivre ou acier inoxydable
Capsule mâle : Acier

Aimant intérieur : Aimant permanent en néodyme.
La puissance de l'aimant dépend de la taille et de la qualité de l'aimant.

Finish :
Snap femelle : uni, motif, logo

Coup de poing masculin : uni, texte, logo

Pack：
Tous ces produits peuvent être fournis avec des pieds, des tiges ou des rivets.
1 set = 1 Male, 1 Female, 2 washes
14mm : 200 jeux/boîte, 20 boîtes/carton
18mm : 100 jeux/boîte, 20 boîtes/carton

Régulier Couleur répertoriée :

Envoyez un courriel pour obtenir d'autres photos de couleurs, comme Spray Black, Rainbow, Pearl Nkl, Pearl Gold, Brush Nkl, Brush Gold, etc.

Quelle est la différence entre la qualité de suspension et la qualité de roulement ?

Application：

Le Extra Thin Double Rivet Magnetic Snaps Fastener is a versatile, high-powered magnetic snap designed for use in single-layer fabrics. Its ultra-thin design is perfect for applications in bags, leather goods, non-woven fabric eco-bags, clothing, stationery cases, document pouches, and file boxes. The magnetic snap features rivet-style prongs on the back, which are paired with rivet caps for secure installation.

Code et taille :

Code	Taille	Coup de poing féminin TH	Pression L	Aimant Taille	Cap            Size	Photo	Description
RC-DR1020	10 mm	2mm	6,2 mm	9,8 mm	9 mm		Un aimant puissant dans un très petit format. For small leather goods, eyeglass cases, toys
RC-DR1220	12 mm	2mm	7,6 mm	11,5 mm	9 mm		Great for pockets and packaging. Face affleurante et petit diamètre.
RC-DR1420	14 mm	2mm	7,6 mm	11 mm	12 mm		Corps mince. Résistance standard. Des boutons-pression élégants et très tendance pour les sacs à main, les bagages et les étuis.
RC-DR1820	18mm	2mm	9 mm	12 mm	12 mm		Corps fin avec un grand pouvoir de rétention. Pour les sacs à main, les bagages, les sacs à dos, l'automobile et l'aérospatiale.

Cap Size: Standard size is 8mm, 9mm, 12mm, 14mm, customized available

The standard rivet length is 6mm, but we also offer shorter 4mm options and longer custom prongs for thicker materials. For best results, we recommend punching a 1/8″ hole in the fabric before inserting the rivet prongs and installing the rivet cap. Tools are required for installation, with options available for both press machines et manual hammering.

Le présent Double Rivet Magnetic Snap comes with high-powered magnets capable of attaching securely to washers or decorative caps. We also offer customization for caps, including various shapes and finishes in alliage de zinc for added aesthetic appeal. Contact our experts for customization service.

The snap set includes both male and female components, along with optional rivet caps for enhanced versatility.

Matériau :
Capsule femelle : Fer, laiton commun ou laiton écologique disponibles
Gélule mâle : Fer
Rivet Cap:Iron, Common Brass or Environmental Brass available

Inner Magnet : Neodymium permanent magnet.

La puissance de l'aimant dépend de la taille et de la qualité de l'aimant.

Richarms, l'entreprise chinoise de fabrication en gros de boutons magnétiques professionnels, propose différentes options de résistance pour les boutons magnétiques minces ou épais. La solution standard est de 0,5 kg à 5 kg, et des solutions de résistance personnalisées sont disponibles.
L'image montre notre force standard :
18mm d'épaisseur (1.5kg / 3kg)
14mm d'épaisseur (0.5kg / 1.5kg)

Finish：

Snap femelle : uni, motif, logo

Coup de poing masculin : uni, texte, logo

Emballage：

Tous ces produits peuvent être fournis avec des pieds, des tiges ou des rivets.
1 set = 1 Male, 1 Female, 2 Rivet cap
10mm: 400 sets/box, 20 boxes/carton
12mm, 14mm: 200 sets/box, 20 boxes/carton
18mm : 100 jeux/boîte, 20 boîtes/carton

Caractéristiques principales :

• Extra-Thin Design: Ideal for single-layer fabrics, ensuring a seamless, low-profile appearance.
• High-Powered Magnets: Strong magnetic attraction ensures a secure hold, perfect for leather goods, bags, and clothing.
• Multiple Rivet Lengths: Standard 6mm, with customizable 4mm or longer options for thicker materials.
• Customizable Caps: Optional decorative caps available in various shapes and finishes for unique designs.
• Easy Installation: Requires 1/8″ hole punch; compatible with press machine or manual hammering tools.
• Versatile Applications: Suitable for use in bags, leather goods, eco-friendly products, clothing, stationery, and more.
• Small Order Acceptable

This magnetic fastener is a durable, reliable choice for designers and manufacturers looking to create innovative products with secure closures.

Options de personnalisation

We support flexible customization based on your design and functional requirements:

• Forme : round, heart, or custom design
• Taille : customizable diameter and thickness
• Finish: electroplated or spray-coated colors
• Surface processing: fabric cover, velvet cover, laser logo
• Installation: double rivet fixation

Small MOQ is accepted for sampling and development stages.

Différence entre suspendre et rouler

Régulier Couleur répertoriée

Rainbow Color et Customized Color Available.

Application

• Handbags and leather goods
• Fashion accessories
• Decorative closures
• Custom hardware projects requiring stable magnetic fastening

Looking for a stable magnetic snap solution for your project?
📩 Contact us by email：info@Richarms.com to discuss customization
📦 Get samples for evaluation and testing