Glossy Epoxy Eyelet Snaps

Descrizione

Glossy epoxy eyelet snaps use a decorative coated eyelet face with a matching magnetic closure. They suit bag and cover projects that need a visible surface detail around the attachment opening.

This page focuses on the glossy eyelet variant, distinct from the separate round epoxy eyelet listing. Confirm the actual face profile and surface treatment from the sample instead of selecting only by the word epoxy.

A glossy eyelet surface for visible closures

The RC-GM1020 EP, RC-GM1420 EP and RC-GM2020 EP references list 10, 14 and 20 mm mating diameters. Their corresponding eyelet outside diameters are 12, 17 and 20 mm. The decorative eyelet is listed as zinc alloy; confirm the remaining component materials separately.

Use tooling that supports the finished face without damaging its coating. Check the cutout, backing and material stack before setting. During inspection, examine the coating edge, the mated alignment and any contact with nearby hardware. Avoid assuming that a glossy surface is scratch-proof or resistant to every cleaner.

Selecting the complete specification

Choose the mating halves, backing components and attachment dimensions as a set. State the finished material thickness, including lining and reinforcement, and identify the visible finish required for each side.

Confirm the component materials and magnet option on the selected drawing and quotation. Similar-looking variants can differ in body depth or attachment geometry. Send authorized artwork if a custom mark is needed, and approve its position on a sample before ordering.

Quality checks and sampling

Inspect the complete installed sample for alignment, loose movement, finish damage and interference with the lining. Open and close it in the direction used by the finished product. If retention is a specified requirement, agree the measurement method and acceptance criteria for that assembly.

Keep the approved component set, drawing and fitted sample as the ordering reference. Confirm quantity, packing, sampling steps and production timing with Richarms for the selected version. A new material stack or different mating part needs a fresh compatibility check.

Questions about glossy epoxy eyelet snaps

Is the decorative eyelet diameter the mating diameter?

No. Both measurements are listed because they serve different purposes. Use the installation drawing for the material opening.

Can I use the flower-eyelet die?

Only if the support profile and setting geometry match. Decorative faces may require different tooling.

Can this be mixed with another manufacturer's mating part?

Do not assume interchangeability. Compare the complete geometry and test the selected pair before specifying it.

What do you need to recommend a size?

Send the application, available mounting area, full material-stack thickness, attachment method, finish requirement and expected quantity.

Compare related options

Compare flower magnetic eyelet snaps, round epoxy magnetic eyelet snaps, grommet snap press dies when reviewing a different structure or installation route.

Discuss your specification with Richarms

Send the product reference, application photographs or drawing, required finish and planned quantity through our product inquiry page. Include the matching-part or material details so we can review the correct version and confirm the next sampling step.