Richarms offset prong magnetic snaps are designed with staggered male and female prong positions. Unlike a standard magnetic snap, the prongs on the two mating parts do not occupy exactly the same upper and lower positions after installation.

This offset arrangement provides more room for planning the cuts, washers, reinforcement layers and bending directions. It is particularly useful for multilayer materials, bound-edge structures and installation areas where the available space is limited.

What Is an Offset Prong Magnetic Snap?

A conventional magnetic snap normally has symmetrical prong positions on its male and female parts. When both parts are installed in the same area, the upper and lower prongs may align with each other.

An offset prong magnetic snap places the prongs of the male and female components at different positions. This staggered construction helps prevent the two sets of prongs from occupying the same installation line.

Offset Prongs Are an Installation Solution

The offset design does not change the basic function of the magnetic closure. Its main purpose is to provide an alternative installation layout when standard aligned prongs are inconvenient for the product structure.

Advantages of Staggered Prong Positions

Reduced Upper-and-Lower Prong Overlap

Because the male and female prong positions are staggered, the two sets of prongs are less likely to meet at the same point within the material assembly.

This can be useful when the product has limited internal space or when several hardware and reinforcement components must be installed close together.

More Flexible Installation Planning

The offset arrangement gives product developers more options when determining where to cut the material and how to bend each prong.

The prongs may be bent inward or outward depending on the material thickness, washer arrangement, available space and required surface profile.

Suitable for Multilayer Materials

Offset prong magnetic snaps may be considered for:

• Thick or multilayer bag materials
• Leather and fabric laminations
• Bound-edge and folded-edge structures
• Reinforced bag panels
• Packaging with internal support layers
• Positions with restricted installation space

Offset Prongs vs Standard Prongs

Offset prongs are not automatically better for every product. The appropriate construction should be selected according to the material, reinforcement, available installation area and production method.

Inward and Outward Prong Bending

Inward Bend

An inward bend keeps the prongs closer to the center of the washer or backing area. This may be useful when the outside installation area is restricted.

Outward Bend

An outward bend directs the prongs toward the outer area and may help distribute their positions across a wider installation surface.

The final bending direction should be verified with the actual material. Excessive bending, repeated bending or an unsuitable washer may reduce installation stability.

How to Choose the Correct Prong Configuration

Before ordering, please provide the following information:

• Total material thickness
• Number of material and reinforcement layers
• Available installation area
• Required inward or outward bending direction
• Magnetic holding-force requirement
• Surface finish and color
• Estimated order quantity

Photos, drawings or material samples can help our team confirm whether an offset, short, standard or long prong structure is more appropriate.

Other Magnetic Snap Prong Options

Richarms supplies different prong constructions for different material assemblies:

• Short Prong Magnetic Snaps for thin materials and lower-profile installation
• Long Prong Magnetic Snaps for thick or multilayer materials
• Standard prong magnetic snaps for general bag and packaging applications
• Offset prong magnetic snaps for staggered installation positions

Custom Magnetic Snap Manufacturing

Richarms is a magnetic snap manufacturer serving bag factories, leather-goods manufacturers, packaging suppliers, brands, importers and hardware distributors.

Available customization options include:

• Different magnetic holding-force levels
• Custom plating and painted colors
• Laser marking, deep laser marking and tooling logos
• Alternative prong positions and lengths
• Different washers and reinforcement components
• Individual or bulk packaging

Final dimensions, materials, finishes and installation methods should be confirmed through an approved sample before mass production.

Request a Sample or Factory Quotation

Send Richarms your material thickness, product drawing, installation-space requirements, finish, quantity and target magnetic strength. Our team can recommend a suitable prong layout and prepare samples for testing.

Contact Richarms for offset prong magnetic snap samples, technical recommendations and a factory quotation.

자주 묻는 질문

What does “offset prong” mean?

It means that the male and female snap prongs are positioned at different locations. The staggered positions help prevent the two sets of prongs from occupying the same installation line.

Is an offset prong snap stronger than a standard snap?

The offset construction mainly changes the installation layout. Magnetic holding force depends on the magnet configuration, product size and complete snap structure rather than the prong position alone.

Where are offset prong magnetic snaps used?

They are commonly considered for multilayer materials, reinforced panels, bound edges and structures with limited space for cutting and bending the prongs.

Can the prongs be bent inward or outward?

Yes. The appropriate bending direction depends on the material, washer arrangement and available installation area. Sample testing is recommended.

Can Richarms customize the finish and magnetic strength?

Yes. Custom finishes, logos, packaging and magnetic holding-force options are available, subject to the required specification and order quantity.

18mm thick short-prong magnetic snap with anti-rotation teeth and a rack-plated finish.

Richarms short prong magnetic snaps are designed for thin leather, fabric, coated paper, covered boxes and other applications where standard prongs may be longer than necessary.

The 18mm version uses a 7.1mm short-prong design. After installation, the shorter prongs can form a lower-profile connection and help reduce prong overlap or visible bulging on thin materials.

As a magnetic snap manufacturer, Richarms can adjust the finish, magnetic holding force, packaging and logo according to your product and target market.

Why Choose Short Prong Magnetic Snaps?

Lower-Profile Installation

On thin material, standard prongs may overlap excessively after they are bent inward. This can create a thicker installation area or cause the covered surface to bulge.

Short prongs require less bending space and can provide a flatter, cleaner installation when matched with a suitable material thickness.

Suitable for Thin Materials

Typical applications include:

• Thin leather and synthetic leather
• Fabric handbags and wallets
• Fabric-covered gift boxes
• Pencil cases and stationery products
• Lightweight packaging and presentation boxes
• DIY bags and small leather goods

Reliable Magnetic Closure

The snap uses a brass shell, steel backing components and an NdFeB magnet. Different magnetic holding-force options can be supplied according to the opening feel, product structure and material strength required by the customer.

Short, Standard, Long and Offset Prongs

The correct prong style depends on the total material thickness, reinforcement layers, washer configuration and desired bending direction.

For thicker materials, see our Long Prong Magnetic Snaps. For the classic round version, see our Round Magnetic Snaps.

omparison of four magnetic snap prong styles and two installation bending methods.

Inward Bend and Outward Bend Installation

Magnetic snap prongs may be bent inward or outward depending on the material, washer, available installation area and required surface profile.

Inward Bend

An inward bend keeps the prongs within the washer area. Short prongs are particularly useful when an inward bend is required on thin material because they can reduce excessive overlap.

Outward Bend

An outward bend distributes the prongs toward the outer edges. This method requires sufficient installation space and should be tested with the actual material and reinforcement structure.

We recommend sample testing before mass production because material compression and reinforcement layers can affect the final fit.

18mm Short Prong Magnetic Snap Specifications

Dimensions are based on the displayed configuration. Final specifications should be confirmed against the approved sample before production.

Component dimensions and available finishes for the 18mm short prong magnetic snap.

Custom Magnetic Snap Manufacturing

Richarms supports standard production and lightweight customization for brands, bag factories, packaging manufacturers, importers and hardware distributors.

Available options include:

• Different magnetic holding-force levels
• Custom plating and painted finishes
• Laser marking, deep laser marking and tooling logos
• Individual or bulk packaging
• Alternative washers and backing components
• Short, standard, long and offset prong configurations

Request Samples or a Factory Quotation

Send us your material thickness, product application, required finish, estimated order quantity and magnetic holding-force requirement. Our team will recommend a suitable prong configuration and prepare samples for installation testing.

Contact Richarms for samples, technical recommendations and a factory quotation for custom short prong magnetic snaps.

자주 묻는 질문

What materials are short prong magnetic snaps suitable for?

They are mainly intended for thin leather, synthetic leather, fabric, covered boxes and lightweight layered materials. Sample testing is recommended for every new material combination.

What is the prong length?

The displayed short-prong version has a prong length of approximately 7.1mm.

What is the difference between short and standard prongs?

Short prongs require less bending space and can help reduce overlapping or bulging on thin materials. Standard prongs are suitable for more common material thicknesses.

Can Richarms customize the magnetic strength?

Yes. Different magnetic configurations can be selected according to the required opening feel, application and material strength.

Can the color and logo be customized?

Yes. Richarms supports custom plating, painted colors, laser marking, deep laser marking and tooling logos, subject to the design and order quantity.

우리의 클램프-온 자석 걸쇠 는 의류, 가방, 친환경 토트백, 커튼 등 다양한 용도로 사용할 수 있는 다용도 솔루션으로 설치가 간편합니다. 이 걸쇠는 구멍이나 기계 없이 펜치로 제자리에 고정하기만 하면 설치가 가능하도록 편리하게 설계되어 전문가용 및 DIY 프로젝트 모두에 이상적입니다.

중국 패션 및 가정용 클램프 온 마그네틱 걸쇠 도매

• 클램프 온 설치: 펜치로 쉽게 설치할 수 있으며, 구멍이나 기계가 필요 없습니다.
• 작지만 강력한: 강력한 자기 강도(8N, 9N, 10N, 12N)의 20x14mm 소형 사이즈.
• 내구성이 뛰어난 금속 구조: 내마모성 및 내식성으로 매일 사용하기에 적합합니다.
• 다양한 애플리케이션: 의류, 가방, 커튼 및 홈 액세서리에 이상적입니다.
• 사용자 지정 가능한 색상 및 강점: 골드, 실버, 앤티크 황동, 건메탈 등으로 제공됩니다.

작지만 강력한 디자인: The round female part measures just 20x14mm, making it compact yet strong enough to ensure a secure hold. Despite its small size, it offers high magnetic strength, capable of providing 8N, 9N, 10N, and even 12N of pull force. For projects requiring stronger or customized magnetic strength, we can tailor the product to your needs.

고품질 금속 구조: 프리미엄 소재로 제작된 이 마그네틱 걸쇠는 뛰어난 내구성과 마모에 대한 저항력을 자랑합니다. 이음새가 없는 디자인으로 세련된 느낌을 더해 핸드백, 의류 및 기타 액세서리의 외관을 한층 더 돋보이게 합니다.

강력한 자석 잠금: 강력한 자석으로 걸쇠가 제자리에 단단히 고정되어 실수로 열리는 것을 방지합니다. 패션 아이템이든 실용적인 아이템이든 이 걸쇠는 물건을 안전하게 고정해 안심하고 사용할 수 있습니다.

간편한 설치: 복잡한 도구나 절차가 필요하지 않습니다. 플라이어를 사용하여 자석 스냅을 천이나 기타 재료에 고정하기만 하면 됩니다. 설치가 빠르고 쉬워 전문 제조업체와 DIY 애호가 모두에게 완벽한 제품입니다.

다양한 애플리케이션: 이 자석 걸쇠는 의류, 핸드백, 홈 데코 등 다양한 용도로 사용할 수 있습니다. 유연성이 뛰어나 다양한 창의적인 프로젝트에 사용할 수 있어 기능성과 심미성을 모두 향상시킬 수 있습니다.

다양한 색상과 강점: 골드, 실버, 앤틱 황동, 건메탈 등의 표준 마감으로 제공되는 마그네틱 걸쇠는 디자인 요구에 맞게 맞춤 제작할 수 있습니다. 은은하거나 눈에 띄는 디자인이 필요하신 분께 어울리는 색상과 마감이 준비되어 있습니다. 또한 8N에서 12N까지 다양한 당김 강도를 제공하며, 더 까다로운 용도에 맞게 맞춤 제작할 수 있는 옵션도 제공합니다.

Material:

암컷 캡슐: 스틸, 구리 또는 스테인리스 스틸
남성 캡슐: 강철

Finish:
남성 스냅: 일반, 문구, 로고

일반 색상 목록 :

스프레이 블랙, 레인보우, 펄 엔케이, 펄 골드, 브러시 엔케이, 브러시 골드, .등과 같은 더 많은 컬러 사진을 이메일로 보내주세요.

행잉 품질과 롤링 품질의 차이점은 무엇인가요?

Tool-Free Magnetic Snap Bag Clip for DIY Projects

그리고 자석 스냅 백 클립 is designed for DIY bag making, bag upgrades and quick closure replacement. It can be clamped onto a finished bag edge without punching holes, sewing or using installation tools. This makes it practical for makers, repair shops, craft brands and customers who want to add a magnetic closure to an existing bag.

The clip-on structure can work with a wide range of material thicknesses. For the best fit, the clip gap and magnetic strength should be matched to the actual leather, fabric, canvas or layered bag edge. Samples are recommended before bulk production.

How the Clamp-On Magnetic Closure Works

Attach It to a Finished Bag Without Tools

Position the magnetic edge clip on the selected bag opening, press it into place and check that both sides align correctly. No special press machine is required for normal installation, so the closure is convenient for small-batch DIY work and finished-product upgrades.

Suitable for Different Material Thicknesses

Thin fabric, lined canvas, PU, leather and multilayer bag edges may require different clip clearances. Richarms can help B2B buyers compare sizes and select a suitable structure based on material samples or thickness information.

Removable and Flexible for Prototyping

The clip-on design is useful during sampling because it allows designers to test the closure position, appearance and opening feel before confirming the final bag design.

Popular DIY and Bag Applications

Handmade Bags and Craft Projects

Add a clean magnetic closure to handmade handbags, pouches, wallets, organizer bags and fabric crafts without investing in installation equipment.

Finished Bag Upgrades and Repairs

The Magnetic Snap Bag Clip can be added to an existing tote, handbag or pouch when the original bag has no closure or needs a convenient replacement.

Small-Batch Brands and Sample Rooms

Design studios, sample rooms and independent brands can quickly test magnetic closure concepts on different bag materials and styles.

Home and Decorative Textile Uses

Depending on the clip specification, the product can also be evaluated for curtains, organizers and other removable textile closures.

Why Buy from Richarms Factory?

Richarms is a magnetic button and bag hardware factory serving B2B buyers, importers, wholesalers, bag manufacturers and private-label brands. We support product selection, sampling, OEM development and bulk supply.

• Factory-direct magnetic closure supply
• Multiple clip sizes, finishes and magnetic force options
• OEM color, logo and packaging evaluation
• Sample support for material and thickness testing
• Batch inspection for appearance, fit and magnetic performance
• Stable B2B production and export coordination

Customization and B2B Ordering

To recommend the right magnetic clip, please send the bag type, edge material, total thickness, preferred finish, required quantity and target magnetic strength. Photos, drawings or physical material samples help our team confirm the most suitable option.

For more factory options, view our magnetic button and bag closure collection.

자주 묻는 질문

Does installation require a tool?

No special installation tool is normally required. The clip is designed to attach directly to the edge of a finished bag.

Can it fit different bag thicknesses?

Yes, different clip specifications can accommodate a range of material thicknesses. Share the finished edge thickness so we can recommend the correct fit.

Can I use it for an existing bag?

Yes. It is suitable for adding a magnetic closure to many finished totes, handbags, pouches and DIY bag projects.

Can Richarms supply samples and bulk orders?

Yes. We support sample evaluation, OEM requirements and factory-direct bulk supply for B2B customers.

What information is needed for a quotation?

Please provide the application, material thickness, finish, quantity, packaging requirement and any available photos or drawings.

Request Samples or a Factory Quote

Need a tool-free magnetic closure for your bag project? Send Richarms your bag photos, material thickness and estimated order quantity. Our factory team will recommend a suitable Magnetic Snap Bag Clip, prepare sample options and provide a B2B quotation.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

주요 기능:

• 14mm extra-long prongs 가죽 및 캔버스와 같은 두꺼운 소재의 경우
• 강력한 자석 고정 보안 및 내구성 강화
• 디자인에 맞는 다양한 색상과 마감으로 제공
• 패션 및 액세서리의 고강도 애플리케이션에 적합
• 특정 요구 사항에 맞게 당김 강도 및 색상을 사용자 지정할 수 있습니다.

우리의 마그네틱 스냅 버튼 가방부터 의류까지 모든 제품에 안정적이고 스타일리시한 잠금장치가 장착되어 있는지 확인합니다. 눈에 띄는 형태와 기능을 모두 갖추고 있습니다.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

14mm Long Prong Magnetic Snaps for Thick Material

Long prong magnetic snaps are the extended-prong option in our classic round magnetic snap range. The 15mm prongs provide additional installation depth for thick leather, canvas, multilayer fabrics and reinforced product structures

This model keeps the familiar appearance and convenient operation of a round magnetic snap while providing longer prongs than the standard version. It is suitable for bag factories, leather-goods manufacturers, packaging producers and other B2B customers working with thicker materials.

RC-L1845 – 14mm Prongs Product Specifications

The 14mm prongs are designed for applications where standard prongs may not provide sufficient installation depth. The finished assembly should be tested with the customer’s actual material thickness before mass production.

18mm long-prong magnetic snap specifications, component options and pull-force data from Richarms.

Where to Use Long Prong Magnetic Snaps

The long-prong magnetic snap is suitable for material stacks up to approximately 9mm thick. In the installation shown, the measured thickness is 6.8mm and the folded prongs already overlap securely. An additional thickness of about 2mm (up to 9mm)is generally workable, subject to the material’s compressibility, washer selection and sample testing.

Installation test at 6.8mm thickness; the overlapping prongs provide allowance for approximately 2mm of additional material.

Thick Leather Bags

The extended prongs can pass through thicker leather layers, reinforcement materials and linings used in handbags, backpacks, briefcases and other leather goods.

Canvas and Heavy Textiles

The extended prongs can pass through thicker leather layers, reinforcement materials and linings used in handbags, backpacks, briefcases and other leather goods.

Packaging and Presentation Boxes

They can also be evaluated for fabric-covered boxes, presentation packaging and other structures where the magnetic snap must pass through a thicker material stack.

Material and Magnetic Strength Options

Component Materials

The female snap can be produced in steel, brass or stainless steel. The male component is available in steel. Washer and surface-finish options can be selected according to the material thickness, corrosion requirement, target price and product positioning.

Standard and Strong Magnet Options

Standard ferrite magnet configurations are available for general applications. Stronger configurations using neodymium magnets can be developed when greater holding force is required. The complete product should be tested to confirm opening force and material load capacity.

Richarms, the Chinese Wholesale Professional Magnetic Snaps Factory has different strength option for thin or thick magnetic snaps, standard solution is from 0.5kg – 5kg, customized strength solution available. The image is showing our standard Strength: 18mm Thick (1.5kg / 3kg) 14mm Thick (0.5kg / 1.5kg)

Colors, Finishes and Custom Logos

Available finishes include nickel, gold, gunmetal, rose gold, antique finishes and other custom colors. Logo options include laser engraving, deep laser engraving and custom tooling, subject to artwork and order requirements.

Custom attachment options for magnetic snaps, including long, short and pointed prongs plus rivet structures.

Long Prongs Within the Round Magnetic Snap Range

This product is the long-prong version of our round magnetic snaps for bags. Choose the standard-prong model for ordinary material thicknesses and the 15mm long-prong model when additional installation depth is required.

Why Source Long Prong Magnetic Snaps from Richarms?

Richarms is a magnetic snap manufacturer supporting brands, bag factories, leather-goods manufacturers and hardware distributors. We provide material matching, magnetic-strength selection, color development, custom logos, sample verification and bulk production.

Request Samples and a Factory Quote

Send us your material type, total thickness, required color, magnetic strength, order quantity and logo requirements. Our factory team will recommend a suitable component combination and prepare samples for testing.

Contact Richarms for 18mm long prong magnetic snap samples, OEM support and wholesale pricing.

이 황동 자석 스냅은 매우 얇고 튼튼하여 재료와 같은 높이에 놓일 수 있습니다. 두께는 2mm, 직경은 10mm 12mm 14mm 18mm, 8mm로 사용자 정의 할 수 있습니다, 20mm 를 다른 구조로 변경합니다.
가죽 지갑, 토트백, 핸드백, 저널 커버, 미니 마사지, 백팩, 쇼핑백 등 외관이 중요하고 견고한 고정력이 필요한 용도로 사용하기에 적합합니다.
자석 본체는 가죽의 두께에 맞춰 설정되며, 얇은 외부 플랜지는 가죽 가방 표면과 같은 높이에 놓입니다.

대량 주문 요금 요청하기 문의 >>>>
소액 주문 PL은 온라인 상점 >>>

엑스트라 씬 마그네틱 스냅 사이즈 목록

코드	크기	여성 스냅 TH	Prong L	자석 크기	사진	설명
RC-E1020	10mm 마그네틱 스냅	2mm	6.2mm	9.8mm	10mm 초박형 마그네틱 스냅	아주 작은 크기에 강력한 자석이 들어 있습니다. 작은 가죽 지갑, 미니 지갑, 안경 케이스, 장난감, 눈 마사지기와 같은 소형 기기용 전자기기 연결용
RC-E1220	12mm 마그네틱 스냅	2mm	7.6mm	11.5mm	12mm 초박형 마그네틱 스냅	작은 지갑, 앞주머니 지갑 및 포장에 적합합니다. 얼굴이 평평하고 직경이 작습니다.
RC-E1420	14mm 마그네틱 스냅	2mm	7.6mm	11mm	14mm 초박형 마그네틱 스냅	얇은 바디. 표준 강도. 지갑, 핸드백, 여행 가방, 케이스, 저널 커버를 위한 세련된 하이패션 스냅입니다.
RC-E1820	18mm 마그네틱 스냅	2mm	9mm	12mm	18mm 초박형 마그네틱 스냅	얇은 바디에 뛰어난 유지력. 핸드백, 토트백, 캐리어, 백팩, 포장, 자동차 및 항공우주용.

리치암은 모든 시장 솔루션에 대해 다양한 자석 강도를 제공합니다.

마그네틱 스냅의 힘은 구조에 사용된 자석의 크기와 강도에 따라 결정됩니다. 자력이 큰 자석일수록 더 강하게 닫히고, 자석이 작을수록 더 약하게 닫힙니다. 일부 마그네틱 스냅은 조절이 가능하여 사용자가 원하는 대로 잠금의 강도를 조절할 수 있습니다.

리치암즈는 토트백, 백팩, 핸드백, 저널 커버, 선물 상자 등 다양한 용도로 사용할 수 있는 전문적인 솔루션을 제공합니다.

중국 도매 전문 마그네틱 스냅 공장 인 Richarms는 얇거나 두꺼운 마그네틱 스냅에 대한 다양한 강도 옵션을 제공하며 표준 솔루션은 0.5kg ~ 5kg, 맞춤형 강도 솔루션을 사용할 수 있습니다.
이미지에는 표준 강도가 표시되어 있습니다:
18mm 두께(1.5kg/3kg)
14mm 두께(0.5kg / 1.5kg)

마그네틱 스냅은 어떻게 제작되나요?

마그네틱 스냅의 암컷 부분에는 일반적으로 자석이 들어 있고, 수컷 부분에는 철이나 강철과 같이 자석에 끌어당기는 강자성 물질이 자화되어 있습니다.

가방 및 지갑, 의류 또는 미니 전자기기를 위한 완벽한 솔루션이 필요한 경우 어떤 세부 사항을 확인해야 하나요?

1단계: 소재 선택
암컷 캡슐: 철, 일반 황동 또는 환경용 황동 사용 가능
남성 캡슐: 철

2단계: F 선택이니쉬 유형
여성 스냅: 일반, 패턴, 로고

남성 스냅: 일반, 문구, 로고

3단계: 마그네틱 스냅 색상 선택

스프레이 블랙, 에폭시 블랙, 레인보우, 펄 니켈(매트 니켈), 펄 골드, 브러시 니켈, 브러시 골드, 앤틱 실버, 앤틱 블랙 등 더 많은 색상 옵션은 이메일로 문의하세요.

걸이형 마그네틱 스냅과 롤링형 마그네틱 스냅의 차이점은 무엇인가요?

전기 도금은 주로 도금할 부품의 크기와 배치에 따라 행잉 도금, 롤 도금, 연속 도금 및 브러시 도금으로 나뉩니다.

행잉 도금과 롤 도금은 전도성 재료의 표면에 얇은 금속 층을 증착하는 공정인 전기 도금의 두 가지 다른 방법입니다. 행잉 도금은 와이어 또는 기타 매달기 메커니즘을 사용하여 도금할 물체를 원하는 금속 이온 용액에 매달아 도금하는 방식입니다. 이를 통해 물체의 전체 표면을 금속으로 고르게 코팅할 수 있습니다. 반면에 롤 도금은 롤러 또는 컨베이어 벨트를 사용하여 도금할 물체를 원하는 금속 이온 용액에 통과시킵니다. 이 방법은 크거나 복잡한 물체를 도금하는 데 더 효율적이지만 도금 범위가 고르지 않거나 누락된 부분이 발생할 수 있습니다.

다양한 유형의 지갑 마개를 위한 포장재
모든 마그네틱 스냅 사이즈는 다리, 스템 또는 리벳과 함께 제공될 수 있습니다.
1세트 = 수 1개, 암 1개, 와셔 2개
10mm 자석 여닫이: 400세트/박스, 20 또는 30박스/상자
12mm 마그네틱 클로저: 200세트/박스, 20박스 또는 30박스/상자
14mm 마그네틱 클로저: 200세트/박스, 20박스 또는 30박스/상자
18mm 자석 여닫이: 100세트/박스, 20박스 또는 30박스/상자

마그네틱 스냅이란 무엇인가요?

자석 스냅은 지갑이나 가방과 같은 의류 및 액세서리에 자주 사용되는 작은 자석으로, 물건을 단단히 닫을 수 있도록 고정하는 데 사용됩니다. 두 개의 자석 스냅을 서로 가까이 놓으면 자석이 서로 끌어당기며 스냅되어 물건을 단단히 고정합니다. 버튼이나 지퍼와 같은 기존의 패스너를 대체할 수 있는 편리하고 사용하기 쉬운 방법입니다.

사례 연구

양면 마그네틱 스냅 소개

양면 마그네틱 스냅은 패션 및 액세서리 산업에서 필수적인 구성 요소로, 기능성과 미적 매력을 모두 제공합니다. 이 잠금장치는 양쪽에 강력한 자석을 사용하여 다양한 제품을 안전하고 매끄럽게 고정할 수 있는 솔루션을 제공합니다. 세련된 디자인과 안정적인 성능으로 디자이너와 제조업체 모두 선호하는 제품입니다.

코드 및 크기:

코드	크기	암컷 스냅 수컷 스냅 TH	프롱 L	마그넷 다이아	사진	설명
RC-DS1420 RC-DS1820	14mm 18mm	2mm 2mm	9mm 9mm	13mm 17mm	안전하고 스타일리시한 18mm 양면 자석 스냅으로 핸드백이나 액세서리에 이상적입니다.	얇은 바디에 뛰어난 유지력. 핸드백, 수하물, 백팩, 자동차 및 항공우주용.

프로젝트의 요구 사항에 따라 다음 중 하나를 선택하세요:​

• 프롱 백킹: 자료에 쉽게 삽입할 수 있어 안전하게 고정할 수 있습니다.​
• 리벳 백킹: 견고한 부착력을 제공하여 특히 두꺼운 소재에 유용합니다.

Material:

암컷 캡슐: 스틸, 황동, 스테인리스 스틸
남성 캡슐: 스틸, 황동, 스테인리스 스틸
내부 자석: 네오디뮴 영구 자석

Finish:
여성 및 남성 스냅: 일반, 패턴, 로고

팩：：
이 모든 것은 다리, 줄기 또는 리벳과 함께 제공될 수 있습니다.
1세트 = 수 1개, 암 1개, 와셔 2개
10mm: 400세트/박스, 20박스/상자
12mm/14mm: 200세트/박스, 20박스/상자
18mm: 100세트/박스, 20박스/상자

마무리 : 마무리
표준 마감은 플레인 암 스냅, 플레인 또는 워딩 수 스냅, 로고 맞춤 제작 가능.
일반 색상은 아래에 나열되어 있습니다. 레이저 로고, 에폭시 코팅, 진공 코팅, 페인팅 등 고객의 요구 사항을 충족하는 맞춤형 마감도 가능합니다.

일반 색상 목록

스프레이 블랙, 레인보우, 펄 엔케이, 펄 골드, 브러시 엔케이, 브러시 골드, 레인보우 등과 같은 더 많은 컬러 사진을 이메일로 보내주세요.

사용자 지정 서비스:

마그네틱 스냅이 귀사의 브랜드와 디자인 비전에 완벽하게 부합할 수 있도록 다음과 같은 서비스를 제공합니다:​

• 로고 각인: 레이저 각인 또는 엠보싱을 통해 브랜드 로고가 새겨진 스냅을 맞춤 제작할 수 있습니다.​
• 커버링 옵션: 가죽이나 패브릭 등 어울리는 소재나 대비되는 소재로 스냅을 덮어 외관을 더욱 돋보이게 하세요.​
• 대체 모양 및 재료: 표준 원형 디자인 외에도 고객의 특정 요구에 맞게 맞춤형 모양을 만들고 다양한 소재를 활용할 수 있습니다.
• 공급하는 전원이 다릅니다: 리치암은 다양한 강도 요구 사항에 따라 다양한 NedFEB 소재를 제공합니다. 표준은 N30, N33 N35 N38 N40 N42 N45 N48 N50 N52 N54 N56입니다.
  • 같은 크기의 자석, 재질 등급이 더 좋고, 힘이 더 강한 자석, 같은 재질의 자석, 크기가 더 크고, 힘이 더 강한 자석.
  • 이 이중 자석 시스템은 표준 소재인 N30만 사용해도 강력한 힘을 발휘합니다.
  • 케이스가 강할수록 좋은 것은 아니며, 어떤 소재에 적용했는지 확인해야 합니다: 두껍고 단단한 가죽의 경우 옳습니다. 얇고 부드러운 천의 경우 너무 강하면 천이 손상 될 수 있습니다. 초박형 마그네틱 스냅남성 쪽은 자석이 없습니다.

협업 프로세스

당사와의 파트너십을 통해 원활하고 효율적인 경험을 보장합니다:​

1. 상담: 디자인 선호도, 수량, 일정 등 프로젝트의 요구 사항을 논의하세요.​
2. 디자인 제안: 저희 팀이 승인을 위해 디자인 목업과 샘플을 제공합니다.​
3. 프로덕션: 승인을 받으면 엄격한 품질 관리 조치를 준수하면서 제조를 시작합니다.​
4. 배달: 고객의 편의를 위해 추적 기능을 제공하여 적시에 배송을 보장합니다.​

애플리케이션

당사의 양면 마그네틱 스냅은 다용도로 사용할 수 있으며 다음과 같은 다양한 제품에 원활하게 통합할 수 있습니다:​

• 핸드백 및 지갑: 우아한 외관을 유지하면서 안전하게 닫을 수 있습니다.​
• 백팩: 보안을 유지하면서 간편하게 액세스할 수 있습니다.​
• 안경 케이스: 안정적인 스냅 잠금 장치로 안경을 보호하세요.​
• 노트북 슬리브: 테크 액세서리의 기능과 스타일을 결합하세요.​
• 가죽 저널: 노트북과 플래너에 세련미를 더하세요.

결론

양면 마그네틱 스냅을 제품에 통합하면 기능, 내구성, 미적 매력이 조화를 이룰 수 있습니다. 맞춤형 옵션과 우수성에 대한 헌신으로 디자인에 맞는 고품질 클로저를 제공하는 신뢰할 수 있는 파트너입니다.​

For 소액 주문 또는 시작하려면 마그네틱 스냅을 위한 맞춤형 서비스제발 문의하기 오늘.

Round Rainbow Magnetic Snaps for Bags

This classic round magnetic closure combines a decorative rainbow-plated surface with a practical snap-together opening. The finish changes between blue, purple, green and gold tones under different light, helping products stand out without changing the familiar installation method.

Choose the model according to product size, material thickness, target cost and required magnetic force. Custom finishes, logo marking and packing are available for volume orders.

Sizes and Model Options

RC-C1435 — 14mm Compact Magnetic Snap

Female shell thickness: 3.5mm; prong length: 7.6mm; magnet diameter: 13mm. This economical option suits small notebooks, card holders, phone pouches, promotional items and lightweight bags.

RC-C1840 — 18mm Standard Magnetic Snap

Female shell thickness: 3.8mm; prong length: 9mm; magnet diameter: 17mm. It provides a balanced profile and is widely used for handbags, wallets and general bag production.

RC-C1845 — 18mm Thick Magnetic Snap

Female shell thickness: 4.5mm; prong length: 9mm; magnet diameter: 17mm. This popular thicker profile is suitable for backpacks, leather bags, totes, briefcases and other everyday closures. Standard and stronger magnet configurations are available.

Need a lower-profile closure? View our 초박형 마그네틱 스냅 or browse the complete magnetic snaps range.

Materials and Magnetic Strength

The male shell is normally steel. Female shells can be produced in steel, brass or stainless steel according to cost, corrosion resistance and application requirements.

Standard and Strong Magnet Options

Standard versions use a ferrite permanent magnet for general closures. For projects requiring greater holding force, a neodymium magnet can be added or substituted after application testing. Holding force should be selected together with fabric thickness, reinforcement and opening feel.

Rainbow Finish and Custom Branding

Rainbow vacuum plating creates a multicolor surface whose appearance varies by angle and lighting. Buyers may specify a rainbow top with a rainbow base or a rainbow top with a gold base. Other finishes include nickel, gold, gunmetal, rose gold, brushed nickel, brushed gold, pearl nickel, pearl gold and spray colors.

Logo and Surface Options

The female face can be plain, patterned or branded. The male component can carry standard wording or a custom logo. Available branding methods include laser marking, deep laser engraving and custom tooling.

Set Composition and Bulk Packing

One complete set contains one male part, one female part and two washers. Standard packing is 200 sets per box for 14mm models or 100 sets per box for 18mm models, with 20 boxes per carton. Packing can be adjusted for approved B2B orders.

Plating Quality and Applications

Hanging plating is suitable when appearance consistency and surface coverage are priorities. Barrel plating can be economical for suitable high-volume components. Our team recommends the process according to part geometry, finish target, order quantity and budget.

Rainbow magnetic snaps are used on handbags, backpacks, wallets, leather goods, notebooks, gift boxes, packaging and promotional products.

Request a Factory Quote

Richarms supports samples, material selection, magnetic-force matching, custom logo development, finishing and bulk production. Send us your required size, material thickness, finish, quantity and target holding force. Contact Richarms for samples or a B2B factory quotation.

Round magnetic snaps for bags are one of Richarms’ core products. This classic four-part closure includes a female magnetic snap, male snap and matching washers. It provides a convenient and reliable closure for canvas bags, gift boxes, pencil cases, leather bags and many other products.

Sample order or small order can placed on our Shopify directly.

Our standard range includes 14mm and 18mm magnetic snaps. Please refer to the existing specification table above for the exact dimensions of each model. Magnet strength, materials, surface finish and corrosion resistance can be configured according to the customer’s target price and quality requirements.

Magnetic snap specifications for 14mm and 18mm models, including component dimensions, pull force, weight and recommended applications.

If you are looking for extra thin option for your design, pls shop our 초박형 마그네틱 스냅

Material Options for Magnetic Snap Components

Female Snap Materials

The female magnetic snap is available in iron, stainless steel and brass. Each material offers a different balance of cost, corrosion resistance and product positioning.

Male Snap Materials

The male snap is available in iron and stainless iron, also described as magnetic or ferritic stainless steel. The final material should be selected according to the required magnetic response, rust resistance and budget.

Washer Materials

Matching washers are available in iron, brass, plastic and stainless steel. We can recommend the washer material according to the fabric or leather thickness, installation method, corrosion requirement and finished-product appearance.

Choose the Right Material for Your Application

Economical Iron Magnetic Snaps

Iron is our highest-volume and most cost-effective option. It is widely used for canvas bags, promotional bags, gift boxes, pencil cases and other high-volume or frequently consumed products. Different plating and protective finishes are available according to the required price level.

Brass Magnetic Snaps for Leather Goods

Brass is commonly selected for handbags, luggage, leather accessories and premium leather goods. It is suitable for customers who prioritize material quality, corrosion performance and a higher-end product position.

Stainless Steel Options

Stainless steel provides better rust resistance than ordinary iron while generally costing less than brass. It is a practical choice for projects that require improved corrosion performance without moving to the highest material-cost level.

Salt Spray and Wash-Test Solutions

96-Hour Salt Spray Requirement

For projects with defined corrosion-resistance requirements, Richarms can configure material and finish combinations designed to meet a 96-hour salt spray test requirement. The applicable test standard, component combination, surface finish and approved sample must be confirmed before mass production.

Up to 30 Wash Cycles

Selected magnetic snap configurations can be developed for up to 30 wash cycles. Test results depend on the fabric, detergent, washing temperature, installation method and customer test procedure, so we recommend sample testing under the intended end-use conditions.

From Cost-Effective to Top-Quality B2B Solutions

Richarms is a magnetic snap manufacturer serving brands, bag factories, leather-goods manufacturers, packaging factories and accessory distributors. We provide solutions ranging from economical high-volume iron magnetic snaps to premium brass and corrosion-resistant stainless steel options.

Our team can support material selection, magnet-strength matching, plating and finish development, sample verification, packaging and bulk production. Instead of offering only one fixed specification, we recommend a practical solution based on your product, target price, quality standard and order quantity.

자기 강도:

Adjustable magnetic power tailored to your specific requirements. Our stronger magnet options provide enhanced security for heavier materials or high-end designs.강도 옵션 :
표준 자석 파워: 페라이트 영구 자석
강력한 자석 파워: 강력한 네오디뮴 영구 자석 추가 또는 교체

A professional domestic test to give you idea how strong Richarms magnetic snap

Richarms, the Chinese Wholesale Professional Magnetic Snaps Factory has different strength option for thin or thick magnetic snaps, standard solution is from 0.5kg – 5kg, customized strength solution available. The image is showing our standard Strength: 18mm Thick (1.5kg / 3kg) 14mm Thick (0.5kg / 1.5kg)

Comprehensive Customization Options

We offer comprehensive custom solutions, ensuring our magnetic snaps seamlessly integrate into your unique design vision:

색상 옵션:일반 색상 목록

Wide selection including gold, nickel, rose gold, antique brass, gunmetal, and customizable finishes upon request.

행잉 품질과 롤링 품질의 차이점은 무엇인가요?

다양한 색상 효과를 제공하는 리치암스 마그네틱 스냅의 행잉 전기 도금과 롤링 전기 도금 마감을 나란히 비교합니다. 요청 시 맞춤형 색상도 제공됩니다.

패키징 솔루션:

Personalized packaging available to enhance your brand identity and customer experience, ideal for gifting or retail presentation.All of these can be provided with Legs, Stems or Rivets.
1세트 = 수 1개, 암 1개, 와셔 2개
14mm: 200세트/박스, 20박스/상자
18mm: 100세트/박스, 20박스/상자

Complete basic magnetic snap set featuring male, female snaps, and washers for secure installation.

Logo Customization:

Regular option

• • 여성 스냅: 일반, 패턴, 로고
    

    Personalize your basic magnetic snaps with plain, patterned, or laser-engraved logo finishes.

  • 남성 스냅: 일반, 문구, 로고
    

    Choose plain, molded wording, or laser logo finishes for your basic magnetic snap male caps.

     

Add your distinctive logo or branding through laser engraving, stamping, or custom molding, enhancing your product’s appeal and brand recognition.

Custom magnetic snap logo options: laser engraving, tooling and deep laser engraving.

Custom attachment options for magnetic snaps, including long, short and pointed prongs plus rivet structures.

Fast link: Short Prongs | Long Prongs | Long Rivet | Malposition Prongs | Point Prongs |

Applications for Round Magnetic Snaps

Canvas Bags and Promotional Products

For canvas bags and promotional items, iron components provide an economical solution for large production quantities. Different magnet strengths can be evaluated according to the fabric thickness and required opening force.

Gift Boxes and Pencil Cases

Round magnetic snaps provide a simple concealed closure for gift boxes, stationery cases and other frequently used products. Component and washer combinations can be adjusted to suit different material thicknesses.

Leather Bags and Premium Leather Goods

For handbags and leather accessories, brass or stainless steel options provide improved material performance. Finishes can be matched to the other metal accessories used in the finished product.

Custom magnetic snap solutions for medical devices, bags and apparel, packaging, everyday products, DIY crafts and stationery.

RICHARMS magnetic snaps applied in stationery, bags, and gift packaging, with other customization options available for industries like medical devices.

For more inspiration, 여기를 클릭하세요.

Installation:

Easy to install by creating two small prong holes in your chosen fabric or leather. Simply insert the snap, fold prongs outward, and secure it in place. DIY crafters can use common household tools like scissors, while industrial manufacturers benefit from specialized prong tools for rapid assembly.

자주 묻는 질문

Which magnetic snap material is the most economical?

Iron is generally the most economical and widely used option, especially for canvas bags, gift boxes, pencil cases and high-volume products.

Which material offers better rust resistance?

Stainless steel provides better rust resistance than ordinary iron and is generally more economical than brass. Brass is commonly selected for premium bags and leather goods.

Can Richarms provide a 96-hour salt spray solution?

Yes. We can propose suitable material and finish combinations for a 96-hour salt spray requirement. The test standard and approved production sample must be confirmed before bulk manufacturing.

Can the magnetic snaps withstand 30 wash cycles?

Selected configurations can be developed for up to 30 wash cycles. We recommend testing the complete installed product because fabric, detergent, temperature and installation method can affect the result.

Should I choose a 14mm or 18mm magnetic snap?

The correct size depends on the product structure, fabric or leather thickness, required holding force and appearance. Send us your application details or material sample, and our factory team can recommend the appropriate model.

Request a Material Recommendation and Factory Quote

Tell us your application, material thickness, required size, order quantity, target price and corrosion or wash-test requirements. Richarms will recommend a suitable magnetic snap combination and prepare samples for evaluation.

Contact Richarms for samples, OEM support and a factory quotation for round magnetic snaps for bags.

Stem are attached so a decorative cap can be used.

Material:

암컷 캡슐: 스틸, 구리 또는 스테인리스 스틸
남성 캡슐: 강철

내부 자석 : 네오디뮴 영구 자석.
자석 출력은 자석 크기와 자석 등급에 따라 다릅니다.

Finish:
여성 스냅: 일반, 패턴, 로고

남성 스냅: 일반, 문구, 로고

팩：：
이 모든 것은 다리, 줄기 또는 리벳과 함께 제공될 수 있습니다.
1 set = 1 Male, 1 Female, 2 washes
14mm: 200세트/박스, 20박스/상자
18mm: 100세트/박스, 20박스/상자

일반 색상 목록 :

스프레이 블랙, 레인보우, 펄 엔케이, 펄 골드, 브러시 엔케이, 브러시 골드, .등과 같은 더 많은 컬러 사진을 이메일로 보내주세요.

행잉 품질과 롤링 품질의 차이점은 무엇인가요?

신청: 신청

그리고 Extra Thin Double Rivet Magnetic Snaps Fastener is a versatile, high-powered magnetic snap designed for use in single-layer fabrics. Its ultra-thin design is perfect for applications in bags, leather goods, non-woven fabric eco-bags, clothing, stationery cases, document pouches, and file boxes. The magnetic snap features rivet-style prongs on the back, which are paired with rivet caps for secure installation.

코드 및 크기:

코드	크기	여성 스냅 TH	Prong L	자석 크기	Cap            Size	사진	설명
RC-DR1020	10mm	2mm	6.2mm	9.8mm	9mm		아주 작은 크기에 강력한 자석이 들어 있습니다. 소형 가죽 제품, 안경 케이스, 장난감용
RC-DR1220	12mm	2mm	7.6mm	11.5mm	9mm		주머니와 포장에 적합합니다. 얼굴이 평평하고 직경이 작습니다.
RC-DR1420	14mm	2mm	7.6mm	11mm	12mm		얇은 바디. 표준 강도. 핸드백, 여행 가방, 케이스용 세련된 하이패션 스냅입니다.
RC-DR1820	18mm	2mm	9mm	12mm	12mm		얇은 바디에 뛰어난 유지력. 핸드백, 수하물, 백팩, 자동차 및 항공우주용.

캡 크기: 표준 크기: 8mm, 9mm, 12mm, 14mm, 맞춤형 가능

The standard rivet length is 6mm, but we also offer shorter 4mm options and longer custom prongs for thicker materials. For best results, we recommend punching a 1/8″ hole in the fabric before inserting the rivet prongs and installing the rivet cap. Tools are required for installation, with options available for both 프레스 기계 그리고 manual hammering.

이 Double Rivet Magnetic Snap comes with high-powered magnets capable of attaching securely to washers or decorative caps. We also offer customization for caps, including various shapes and finishes in 아연 합금 for added aesthetic appeal. 연락처 our experts for customization service.

The snap set includes both male and female components, along with optional rivet caps for enhanced versatility.

Material:
암컷 캡슐: 철, 일반 황동 또는 환경용 황동 사용 가능
남성 캡슐: 철
리벳 캡: 철, 일반 황동 또는 환경용 황동 사용 가능

내부 자석 : Neodymium permanent magnet.

자석 출력은 자석 크기와 자석 등급에 따라 다릅니다.

중국 도매 전문 마그네틱 스냅 공장 인 Richarms는 얇거나 두꺼운 마그네틱 스냅에 대한 다양한 강도 옵션을 제공하며 표준 솔루션은 0.5kg ~ 5kg, 맞춤형 강도 솔루션을 사용할 수 있습니다.
이미지에는 표준 강도가 표시되어 있습니다:
18mm 두께(1.5kg/3kg)
14mm 두께(0.5kg / 1.5kg)

Finish：

여성 스냅: 일반, 패턴, 로고

남성 스냅: 일반, 문구, 로고

팩：

이 모든 것은 다리, 줄기 또는 리벳과 함께 제공될 수 있습니다.
1 set = 1 Male, 1 Female, 2 Rivet cap
10mm: 400 sets/box, 20 boxes/carton
12mm, 14mm: 200 sets/box, 20 boxes/carton
18mm: 100세트/박스, 20박스/상자

주요 기능:

• Extra-Thin Design: Ideal for single-layer fabrics, ensuring a seamless, low-profile appearance.
• High-Powered Magnets: Strong magnetic attraction ensures a secure hold, perfect for leather goods, bags, and clothing.
• Multiple Rivet Lengths: Standard 6mm, with customizable 4mm or longer options for thicker materials.
• 사용자 지정 가능한 캡: Optional decorative caps available in various shapes and finishes for unique designs.
• Easy Installation: Requires 1/8″ hole punch; compatible with press machine or manual hammering tools.
• 다양한 애플리케이션: Suitable for use in bags, leather goods, eco-friendly products, clothing, stationery, and more.
• 소액 주문 허용

This magnetic fastener is a durable, reliable choice for designers and manufacturers looking to create innovative products with secure closures.

사용자 지정 옵션

We support flexible customization based on your design and functional requirements:

• 모양: round, heart, or custom design
• 크기: customizable diameter and thickness
• Finish: electroplated or spray-coated colors
• Surface processing: fabric cover, velvet cover, laser logo
• Installation: double rivet fixation

Small MOQ is accepted for sampling and development stages.

걸기와 롤링의 차이점

일반 색상 목록

무지개 색상 그리고 맞춤형 색상 사용 가능.

애플리케이션

• Handbags and leather goods
• Fashion accessories
• Decorative closures
• Custom hardware projects requiring stable magnetic fastening

Looking for a stable magnetic snap solution for your project?
📩 Contact us by email：info@Richarms.com to discuss customization
📦 Get samples for evaluation and testing