Magnetic fastener incoming inspection should compare delivered parts with an agreed specification. It should not introduce new acceptance limits after a shipment arrives or treat a casual hand check as a complete inspection method.
For distributors, the first question is whether the received material is the correct, identifiable configuration. Appearance, dimensions and functional checks then need their own clear criteria.
Check Identification and Appearance

Match the received part reference, quantity and any agreed lot identification to the order documents. Check whether mating pieces and accessories are present as specified. Keep mixed or unidentified material separate while its identity is resolved.
Review visible surfaces against the approved appearance reference. Record the location and type of an observed difference instead of using a broad label such as poor quality. Sampling quantities and acceptance rules should follow the agreement for the order, not a universal number invented for every product.
Verify Agreed Dimensions
Measure the dimensions identified in the approved specification using the agreed method. Record units and relevant measurement locations. If the supplier and buyer obtain different results, compare methods and samples before drawing conclusions about the whole batch.
Document functional checks separately from dimensions. A component can meet an overall size requirement and still need evaluation in its intended mating arrangement. Conversely, an unfamiliar opening feel does not by itself prove a dimensional defect.
Document Functional Checks

Record fixture, direction and method for force checks
For force-related checks, record the fixture, pull direction, mating parts and assembly condition. Results obtained under different conditions should not be treated as directly equivalent. A photograph of a force reading is incomplete without identifying the tested configuration and method.
When results fall outside the agreed criteria, identify the affected material and preserve representative evidence. Ask for a review against the same specification. Keep an inspection observation, a confirmed defect and an agreed disposition as distinct stages in the record.
Sıkça Sorulan Sorular
Can one hand check replace inspection?
No. Use the agreed checks and methods.
Can two force results be compared without method details?
Not reliably; first compare the test conditions.
Is there one sampling quantity for all orders?
No. Agree sampling and acceptance requirements for the order.
What should be recorded when a problem appears?
Part identification, observed difference, method and relevant evidence.
Discuss Your Requirements
Send your acceptance criteria so we can review a suitable inspection checklist.
Contact Richarms for a requirements review.
Related Buying Guides
- Magnetic Fastener Sourcing for Distributors: Qualification and Repeat Supply
- Magnetic Fastener Drawing Review: Dimensions and Acceptance Criteria
For additional visual product references, visit Richarms product references on Pinterest. Use the agreed drawing and physical sample, rather than social images, for purchasing approval.