Blog

17 11, 2026

Double-Sided Magnetic Snaps for Bags That Close From Either Face

By |Kasım 17th, 2026|blog, Magnetic Snaps for Leather Goods|Double-Sided Magnetic Snaps for Bags That Close From Either Face için yorumlar kapalı

Some bag and case designs need a magnetic closure that can be approached from either face. This article explains what the published double-sided snap construction offers, how it differs from a one-magnet pairing, and what to verify on a sample.

17 11, 2026

Short Prong and Long Prong Magnetic Snaps: Matching Leg Length to the Material Stack

By |Kasım 17th, 2026|blog, Magnetic Snaps for Leather Goods|Short Prong and Long Prong Magnetic Snaps: Matching Leg Length to the Material Stack için yorumlar kapalı

Prong length should be judged against the finished bag or box stack, including reinforcement and lining. This article compares short and long prong options and sets out what to trial before a bulk order.

17 11, 2026

Offset Prong Magnetic Snaps: When the Set Point Sits Near an Edge or Seam

By |Kasım 17th, 2026|blog, Magnetic Snaps for Leather Goods|Offset Prong Magnetic Snaps: When the Set Point Sits Near an Edge or Seam için yorumlar kapalı

When a magnetic snap must be set close to an edge, seam or bound edge, aligned male and female prongs can compete for the same line inside the stack. This article explains when a staggered prong layout is worth evaluating, and what to confirm on a sample.

17 11, 2026

Magnetic Fastener Incoming Inspection: A Distributor’s Checklist

By |Kasım 17th, 2026|blog|Magnetic Fastener Incoming Inspection: A Distributor’s Checklist için yorumlar kapalı

Magnetic fastener incoming inspection should compare delivered parts with an agreed specification. It should not introduce new acceptance limits after a shipment arrives or treat a casual hand check as a complete inspection method.For distributors, the first question is whether the received material is the correct, identifiable configuration. Appearance, dimensions and functional checks then need their own clear criteria.Check Identification and AppearanceTest equipment reference only. A photograph does not establish a product-specific pass result or certification.Match the received part reference, quantity and any agreed lot identification to the order documents. Check whether mating pieces and accessories are present as specified. [...]

16 11, 2026

Magnetic Fastener Drawing Review: Dimensions and Acceptance Criteria

By |Kasım 16th, 2026|blog|Magnetic Fastener Drawing Review: Dimensions and Acceptance Criteria için yorumlar kapalı

Magnetic fastener drawing review connects the buyer’s requirements to a part that can be checked. An overall width and a photograph may identify the product family, but they may not describe the interfaces that determine whether the assembly fits.Start with a readable drawing revision and a list of unresolved requirements. Keep the review focused on the proposed magnetic fastening component, rather than assuming a general drawing establishes every end-use capability.Identify Functional InterfacesDistinguish supplied components and their interfaces in the drawing or sample reference.Identify the surfaces, holes and mating features that interact with the surrounding assembly. Show which view contains each [...]

15 11, 2026

Magnetic Fastener Sourcing for Distributors: Qualification and Repeat Supply

By |Kasım 15th, 2026|blog|Magnetic Fastener Sourcing for Distributors: Qualification and Repeat Supply için yorumlar kapalı

Magnetic fastener sourcing for distributors requires more than selecting a familiar shape. A distributor needs a component that can be identified, described and reordered without confusing similar configurations.This guide concerns magnetic fastening components and their purchasing records. It does not establish electrical, medical or safety-critical suitability. Application-specific requirements need a separate review of the proposed part.Define the Stocked Product FamilyAsk which processes apply to the proposed component rather than inferring them from a factory photograph.Define the product family you intend to stock and the applications your customers describe. Separate a complete mating assembly from a single component. Record which variants [...]

14 11, 2026

Magnetic Snap RFQ Checklist for Leather Goods Brands

By |Kasım 14th, 2026|blog|Magnetic Snap RFQ Checklist for Leather Goods Brands için yorumlar kapalı

A magnetic snap RFQ checklist helps a leather goods buyer request a comparable quotation. A picture and a quantity can start a conversation, but they rarely identify everything needed to select the correct assembly.A useful brief separates confirmed requirements from questions for the supplier. You do not need to invent missing dimensions or choose a magnet specification before asking for help.Describe the End ProductIdentify the relevant sample rather than asking a supplier to infer a model from a broad product display.Describe the finished item and where the closure sits. State the material layers, available space and the appearance expected on [...]

13 11, 2026

Magnetic Snap Reorder Consistency: Controlling Changes Between Batches

By |Kasım 13th, 2026|blog|Magnetic Snap Reorder Consistency: Controlling Changes Between Batches için yorumlar kapalı

Magnetic snap reorder consistency depends on identifying the version previously approved. Repeating a short product name may leave out a finish variation, backing piece or change introduced during sampling.For a repeat order, start with the last accepted specification and the retained reference. Treat any difference as a question to resolve before supply, rather than assuming that the same catalog photograph guarantees the same assembly.Identify the Reference BatchKeep the selected profile with the reorder specification; do not substitute a similar shape without review.Find the previous order reference, approved sample identifier and specification revision. Confirm whether the reorder concerns the original configuration [...]

12 11, 2026

Magnetic Snap Sample Approval: From Prototype to Signed Reference

By |Kasım 12th, 2026|blog|Magnetic Snap Sample Approval: From Prototype to Signed Reference için yorumlar kapalı

Magnetic snap sample approval should leave a clear record of what the buyer accepted. A message saying “looks good” can refer to color, shape or the whole prototype, and those interpretations are not interchangeable.Use approval to close specific questions. Keep unresolved dimensions, functional checks and appearance changes visible until the responsible buyer has reviewed them.Define Approval CriteriaRecord which loose pieces are included in the approved sample configuration.Before the sample arrives, write a short checklist covering the component identity, appearance, fit and intended use. Identify the mating pieces and the product construction that will be used for evaluation. Where a dimension [...]

11 11, 2026

Magnetic Snap Finish Matching: Approving Color Across Bag Hardware

By |Kasım 11th, 2026|blog|Magnetic Snap Finish Matching: Approving Color Across Bag Hardware için yorumlar kapalı

Magnetic snap finish matching is an appearance decision across a complete product. The same color name can describe different visual results on a snap, buckle and zipper pull. Buyers should therefore approve a reference set rather than rely only on words such as gold or gunmetal.The aim is to define an acceptable relationship between the parts. Perfect visual identity may not be practical across different shapes and surfaces, so the buyer and supplier need a shared comparison method.Build a Finish Reference SetCompare the visible surfaces and component profiles, not just a shared finish name.Collect the hardware pieces that will appear [...]

Go to Top