Single rivet press dies support the corresponding magnetic snap while a compatible press sets its rivet attachment. They are tooling components, not a complete press or a universal die set for every single-rivet product.
Single Rivet Press Dies
Açıklama
Single rivet press dies support the corresponding magnetic snap while a compatible press sets its rivet attachment. They are tooling components, not a complete press or a universal die set for every single-rivet product.
Choose the dies from the snap drawing and the machine connection. The nominal snap size identifies only part of the requirement; the cap profile, post length and support shape also determine the result.
Press tooling matched to a single-rivet snap
The listed machine-tool references cover 14 and 18 mm snap families with different female-part thicknesses. Provide the exact snap model, cap diameter and material stack when requesting a set. Confirm the upper mounting connection and lower die seating dimensions of your press.
Set up the tooling on scrap material first. Align the upper and lower parts, use the press manufacturer’s operating procedure and increase the setting action only as needed to obtain a sound attachment. Inspect for a loose rivet, distorted cap or damaged magnetic face before moving to production.
Snap details the press dies must match
Send the snap model, photographs of both sides, cap or eyelet dimensions and the total material thickness. Identify the tool components you already have and the installation method you intend to use.
Tooling supplied for a Richarms product must match that particular product specification. Neither a similar appearance nor the same nominal diameter proves compatibility with another manufacturer’s hardware. Ask for a fit check when the product or tool source changes.
Tool references: Iron tooling; RC-SR1420MT, RC-SR1435MT, RC-SR1820MT, RC-SR1840MT and RC-SR1845MT references.
Press trials before production
Agree a sample-setting trial before releasing a tool combination for production. Check the installed part for looseness, rotation, deformation, visible marks and proper magnetic engagement. Include the backing or reinforcement used in the finished article.
Keep the approved product, tool reference and setup record together. If a later material batch changes thickness or firmness, repeat the fitting check. More setting force is not a reliable remedy for an incorrect rivet length or a mismatched support profile.
Questions about single rivet press dies
Can these dies fit any press?
No. The machine shank, thread, seat and working clearance must match. Send photographs and measurements of the press connection.
Will the die fit a snap from another factory?
Only after checking the actual components. Similar nominal diameter does not establish compatibility.
Are the tools universal between manufacturers?
No. Product geometry and tooling connections may differ. Provide samples or drawings for a compatibility assessment.
What should be checked before production?
Approve the tool fit and a finished-material setting sample, including appearance, attachment stability and closure operation.
Related single- and double-rivet tooling
Compare single rivet hand tools, single rivet magnetic snaps fastener, double rivet press dies when reviewing a different structure or installation route.
Send your snap drawing for die matching
Send the product reference, application photographs or drawing, required finish and planned quantity through our product inquiry page. Include the matching-part or material details so we can review the correct version and confirm the next sampling step.
Turkish 
English 
French 
Italian 
Portuguese 
Spanish 
Korean 
Japanese 
German 
Dutch