Grommet snap press dies provide a machine-setting option for the matching magnetic grommet assembly. They are intended to work with a compatible press and the specified snap components, rather than as a universal eyelet die.
Grommet Snap Press Dies
Açıklama
Grommet snap press dies provide a machine-setting option for the matching magnetic grommet assembly. They are intended to work with a compatible press and the specified snap components, rather than as a universal eyelet die.
The RC-ME1720MT reference belongs to the machine-tool family. Confirm both the product interface and the press connection before ordering it for an existing production station.
Press dies for a matched grommet closure
The published application reference is a 17 mm family with a 2 mm female-part thickness and an 8 mm prong dimension. Send the actual component drawing and material stack to confirm the working profile. Also provide the upper shank or thread, lower seat and machine clearance.
Run an initial setting trial at a controlled setup. Inspect whether the decorative face is fully supported and whether the backing closes evenly. Then mate the closure halves and check their alignment. Record the approved tool and snap combination so a similar-looking grommet is not substituted without a new trial.
Grommet snap details the press dies must match
Send the snap model, photographs of both sides, cap or eyelet dimensions and the total material thickness. Identify the tool components you already have and the installation method you intend to use.
Tooling supplied for a Richarms product must match that particular product specification. Neither a similar appearance nor the same nominal diameter proves compatibility with another manufacturer’s hardware. Ask for a fit check when the product or tool source changes.
Tool references: Iron tooling; RC-ME1720MT for the specified 17 mm family with 2 mm female thickness and 8 mm prong reference.
Press setting trials and acceptance
Agree a sample-setting trial before releasing a tool combination for production. Check the installed part for looseness, rotation, deformation, visible marks and proper magnetic engagement. Include the backing or reinforcement used in the finished article.
Keep the approved product, tool reference and setup record together. If a later material batch changes thickness or firmness, repeat the fitting check. More setting force is not a reliable remedy for an incorrect rivet length or a mismatched support profile.
Questions about grommet snap press dies
Can I order only the lower die?
Identify the existing upper tool and the exact product. Partial replacement needs a compatibility check of the complete setting pair.
Is this interchangeable with the hand-tool version?
The application may be related, but the machine attachment is different. Use the MT drawing for press installation.
Are the tools universal between manufacturers?
No. Product geometry and tooling connections may differ. Provide samples or drawings for a compatibility assessment.
What should be checked before production?
Approve the tool fit and a finished-material setting sample, including appearance, attachment stability and closure operation.
Hand tools and eyelet snaps
Compare grommet snap hand tools, glossy epoxy eyelet snaps, double rivet press dies when reviewing a different structure or installation route.
Match press dies to your grommet snap
Send the product reference, application photographs or drawing, required finish and planned quantity through our product inquiry page. Include the matching-part or material details so we can review the correct version and confirm the next sampling step.
Turkish 
English 
French 
Italian 
Portuguese 
Spanish 
Korean 
Japanese 
German 
Dutch