Many bag and packaging programmes do not start with a special prong layout, an extra-thin body or a lock-style face. They start with a classic round magnetic snap: a familiar four-part closure that can be specified, sampled and re-ordered as a standard factory range. Even on an everyday programme, the useful work is to read the current product facts and confirm the combination on the finished article.

Round magnetic snaps for bags are published as one of Richarms’ core products. The classic four-part closure includes a female magnetic snap, a male snap and matching washers. The product page describes it as a convenient closure for canvas bags, gift boxes, pencil cases, leather bags and many other products. That is the family this article is about. It is not a complete account of every magnetic snap in the catalogue.

Front view of Richarms round magnetic snaps in nickel finish, available in 14mm and 18mm

What the published standard range includes

The live product page states that the standard range includes 14 mm and 18 mm magnetic snaps. Those are the sizes given for this product. They should not be presented as a complete size range for all magnetic snaps, and the choice between them depends on the product structure, fabric or leather thickness, required holding force and appearance.

The short product details list model numbers RC-C1435, RC-C1840 and RC-C1845, in brass, steel and magnet, with custom logo options described as laser, carved or tooling. Exact component dimensions should be taken from the current specification table on the product page and confirmed against the approved sample. This article does not copy that table, because a figure that is later updated on the product page should not live on as an independent specification.

A standard set is described as one male, one female and two washers. The same page notes that the snaps can be provided with legs, stems or rivets. Packaging is published as 200 sets per box for 14 mm and 100 sets per box for 18 mm, with 20 boxes per carton. Those packing figures belong to this product family as currently published; confirm them at the time of order if packing presentation matters to the programme.

Materials should follow the article and the quality requirement

The female magnetic snap is available in iron, stainless steel and brass, each offering a different balance of cost, corrosion resistance and product positioning. The male snap is available in iron and stainless iron, also described as magnetic or ferritic stainless steel, selected according to magnetic response, rust resistance and budget. Matching washers are available in iron, brass, plastic and stainless steel, and can be recommended according to thickness, installation method, corrosion requirement and appearance.

The product page groups those choices in practical terms. Iron is described as the highest-volume and most cost-effective option, widely used for canvas bags, promotional bags, gift boxes, pencil cases and other high-volume products. Brass is commonly selected for handbags, luggage, leather accessories and premium leather goods. Stainless steel is described as providing better rust resistance than ordinary iron, while generally costing less than brass.

Those are published starting points, not automatic assignments. The material combination should be recommended against the bag, target price and quality standard, then approved on a sample.

Finish, strength and test requirements need their own confirmation

Regular colours listed on the product page include gold, nickel, rose gold, antique brass and gunmetal, with other finishes available on request. Female snaps may be plain, patterned or logoed; male snaps may be plain, with wording, or with a logo. Logo routes include laser engraving, stamping or custom moulding, and a deeper laser-engraving option is also shown. Approve the finish on the production-intent sample, including any difference between hanging and rolling electroplating if that process is part of the brief.

Magnet options are described in two published groups: a standard ferrite permanent magnet, and a stronger option by adding or replacing a neodymium permanent magnet. The page also states that a standard holding-force range of 0.5 kg to 5 kg is available, with customised strength on request. Those figures are a published starting range, not a confirmed result on every bag. Opening feel and material load capacity should be confirmed on the finished article.

For programmes with a defined corrosion-resistance requirement, material and finish combinations can be configured to meet a 96-hour salt-spray test requirement. The applicable test standard, component combination, surface finish and approved sample must be confirmed before mass production. Selected configurations can also be developed for up to 30 wash cycles. Results depend on the fabric, detergent, washing temperature, installation method and the customer’s test procedure, so sample testing under the intended end-use conditions is recommended. Neither figure should be specified without that confirmation.

How to brief an everyday bag programme

Everyday programmes still benefit from a complete brief. A size and a colour name are not enough if the stack, fixing and quality requirement are left unstated.

  1. Identify the article: canvas bag, promotional bag, gift box, pencil case, leather bag, or another everyday product.
  2. Shortlist 14 mm or 18 mm from this standard range, or ask for a recommendation against the structure, thickness, holding-force need and appearance. Do not treat those two sizes as the only magnetic snap sizes available elsewhere in the catalogue.
  3. State the finished material thickness and the intended fixing (prong, stem or rivet), including reinforcement and lining.
  4. Select female, male and washer materials against cost, appearance and corrosion requirements.
  5. Agree finish, colour and any logo or wording from a visual standard.
  6. State any salt-spray or wash-test requirement, including the test standard or procedure, rather than quoting a hour or cycle count on its own.
  7. Choose a holding-force option for the article, then confirm it on the assembled sample.
  8. Trial the intended setting method on the actual stack. A familiar workshop method still needs a check with the selected snap and dies or tools.
  9. Inspect fixing reliability and magnetic closure force as separate checks, and include order quantity, packing preference and target timing.

Keep this family in its place in the catalogue

Round magnetic snaps of this type sit inside the wider magnetic snaps catalogue, which also includes other sizes, shapes and constructions. If the programme later needs an extra-thin body, a long or short prong, an offset layout or a lock-style face, move to that family rather than stretching this standard range. Final dimensions, materials, finishes and installation methods should be confirmed through an approved sample before mass production.

Richarms is a magnetic snaps manufacturer and custom bag hardware factory founded in Foshan, China, in 2003.

author avatar
riharms